Simmons760
12-27-2023, 01:14 PM
I finally joined this forum after several years of scrolling through pages and pages of builds and tutorials. I’ve been working on a 1968 Firebird since about 2016. It’s got a full Speedtech subframe/suspension set up from front to rear, Dutchman 9” rear end, Wilwoods on all 4 corners, LS3 with a Texas Speed stage 1 cam, 4L70E transmission, Fesler interior, and several other parts from Anvil, Detroit Speed, Dakota Digital, Vintage Air, Ringbrothers, Restomod Air, Raingear, Dapper, Digitails, etc. Right now I’m trying to finish up the last 10% of the car with all the fine detail stuff. The bodywork is okay, but I did it myself in my last shop and it’s far from perfect. I wanted to get the car protected before I moved to the east coast so I sprayed it in a hurry and the end result was not great due to a wrong temperature activator being used. I have a lot of paint and body things to address, but sooner or later it will be good to go. For now I would like to get it buttoned up and run it…work all the kinks out and one day get it all painted proper. I’m happy to be apart of the community and look forward to interacting with you all.