1968rs/1969l46
11-13-2023, 04:59 AM
Good morning pro/touring, I’m sorting out my two cars, my 68 rs I’ve owned since 1979, was fully restored in 81-82 now it’s time to wake it up again. My kids have grown & flown. My other car is a survivor 1969 l46 corvette, more on that one later…
my 68 rs is truly a nice car, it needed brakes so an upgrade to willwood 4 wheel power disc is done (dyna pro 4 piston /2 rear) is done, now getting full ridetech coil overs/ four link/ truturn/ 2” drop spindles.
Once the car is back on the ground I will try to figure out as much wheel tire I can fit inside the wheel wells without tubbing or rubbing.
Ive had some input from the guys at ridetech, I found some summit wheels with specs that might work, I did get a wheel/tire fitment tool from speedway motors to help with the head scratching task….. should be here today.
I look forward to getting after this project, an ls3/530 tremec 6 spd will be my goal for drivetrain…. But one step at a time….. I’ll head over to the wheel size thread for advice as I’m awaiting the rear cradle and coil kit to be ordered in, I just received the front upper lower arms and coil overs 2 weeks ago, shaking the piggy bank for the back half…..
my 68 rs is truly a nice car, it needed brakes so an upgrade to willwood 4 wheel power disc is done (dyna pro 4 piston /2 rear) is done, now getting full ridetech coil overs/ four link/ truturn/ 2” drop spindles.
Once the car is back on the ground I will try to figure out as much wheel tire I can fit inside the wheel wells without tubbing or rubbing.
Ive had some input from the guys at ridetech, I found some summit wheels with specs that might work, I did get a wheel/tire fitment tool from speedway motors to help with the head scratching task….. should be here today.
I look forward to getting after this project, an ls3/530 tremec 6 spd will be my goal for drivetrain…. But one step at a time….. I’ll head over to the wheel size thread for advice as I’m awaiting the rear cradle and coil kit to be ordered in, I just received the front upper lower arms and coil overs 2 weeks ago, shaking the piggy bank for the back half…..