PDA

View Full Version : ATS AFX Spindles


reschke18
09-02-2023, 04:38 AM
New, never been driven on. Installed a couple times for mock up only.
$1000 obo - shipping available
Located in Olathe, KS
209008
209009209010
209011
reschke18
09-05-2023, 08:33 AM
Brake ducts are sold.
$1100 for spindles shipped.
reschke18
09-23-2023, 07:30 PM
Bump. $1000 shipped
Closf71
09-28-2023, 02:00 PM
What vehicle are they intended for?
reschke18
09-28-2023, 04:25 PM
What vehicle are they intended for?

From Speedtech’s website:

Designed to fit the 64-72 A body, 67-69 F body, and 68-74 X body, and 78-88 G-body

I bought them for a 69 Camaro.
slazisme
09-28-2023, 05:08 PM
What hubs are on these C6 with the plug speed sensor or C7's, can you post a pic of the inner spindle. How old are the spindles? Tks.
reschke18
09-28-2023, 05:47 PM
What hubs are on these C6 with the plug speed sensor or C7's, can you post a pic of the inner spindle. How old are the spindles? Tks.

C6 with the plug. I have them boxed ready to ship but if you’re serious I will open them up and send a recent picture. Here is a representative picture. I bought them 8 years ago from a forum member who had done the same as me and only used them for mock-up.
209454
reschke18
10-26-2023, 04:56 PM
Bump. $1000 shipped.
drb930
10-27-2023, 08:57 AM
What does it take to put these on a G-Body?
reschke18
10-27-2023, 06:22 PM
Direct spindle replacement for the G body but will need C5/C6 Corvette brakes. I have those too and could part ways with them for the right price.
drb930
10-28-2023, 09:42 AM
So are these the taller ones with the 1" drop built in?
No steering arms?
reschke18
10-28-2023, 09:50 AM
Correct. And you use your existing steering arms from your old spindles.
drb930
10-28-2023, 10:09 AM
The cast iron steering arms?
reschke18
10-28-2023, 11:05 AM
Yes you unbolt them from your original spindles and re use them.
Crashflow
11-01-2023, 07:34 AM
What upper and lower controls arm will work with this spindle?
reschke18
11-01-2023, 08:02 AM
Works with all control arms that I know of, I was going to use Speedtech arms.
reschke18
12-16-2023, 12:07 PM
Spindles still available. $1000 shipped. OBO
70ptta
12-16-2023, 02:24 PM
Will these work with ridetech arms on a first gen f body?
reschke18
12-17-2023, 06:10 PM
Will these work with ridetech arms on a first gen f body?

Will work with Ridetech control arms, but not with Ridetech Truturn.
reschke18
12-22-2023, 11:52 PM
Will these work with ridetech arms on a first gen f body?

They will work with the Ridetech control arms but not truturn.
BobinFL
12-31-2023, 05:10 PM
are these still available?

- - - Updated - - -

Are these still available?
reschke18
12-31-2023, 05:18 PM
are these still available?

- - - Updated - - -

Are these still available?

Yes they are.
BobinFL
01-01-2024, 11:23 AM
Sent You a PM
reschke18
01-01-2024, 12:01 PM
Sold.