cwylie
12-31-2022, 01:32 PM
Kong dual pass lid w/ 2k miles. The atmospheric sensor bung on the passenger side was machined off by a machine shop to allow the steam vent kit to fit(drivers side is still there) and blenders were added to the outputs. 2k miles on it. $1750
FI interchiller 20mm spacer tapped for the IAT available for extra $350
Motion Race Works 4 port steam vent kit with longer lines to fit lid and line to connect to radiator $175
Lid: https://kongperformance.com/products/kong-performance-dual-pass-billet-lid
Spacer: https://fiinterchillers.com/product/20mm-lsa-lid-spacer/
Steam Vent kit: https://www.motionraceworks.com/products/lsa-ls9-supercharger-steam-kit
FI interchiller 20mm spacer tapped for the IAT available for extra $350
Motion Race Works 4 port steam vent kit with longer lines to fit lid and line to connect to radiator $175
Lid: https://kongperformance.com/products/kong-performance-dual-pass-billet-lid
Spacer: https://fiinterchillers.com/product/20mm-lsa-lid-spacer/
Steam Vent kit: https://www.motionraceworks.com/products/lsa-ls9-supercharger-steam-kit