Gen 4 6.0 Iron w/ 823 heads & 4l80e trans

[DualQuadDave]

Decided to sell my 6.0 Gen 4 Motor and 4l80e trans. Was saving it for a Jeep project, but too many irons in the fire right now. Complete intake pan LY6 6.0 w/ AFM/DOD delete, 823 square port heads and intake, exhaust manifolds and truck pan. Trans is a 2003/2004 Savanna 2wd 4l80e, complete w/ converter. Everything runs, but probably would rebuild, just because. for everything. Can ship anywhere, just ask and get a # for you. DM with questions. Will Post up some pics soon. Motor/trans located in South Florida 33026. Thanks! SOLD

[IMPALAMAN1]

curious to ship to 75165

[DualQuadDave]

curious to ship to 75165

Around $300 or so via YRC which is by far the cheapest shipping right now. DM me for more info.

[andrewb70]

Decided to sell my 6.0 Gen 4 Motor and 4l80e trans. Was saving it for a Jeep project, but too many irons in the fire right now. Complete intake pan LY6 6.0 w/ AFM/DOD delete, 823 square port heads and intake, exhaust manifolds and truck pan. Trans is a 2003/2004 Savanna 2wd 4l80e, complete w/ converter. Everything runs, but probably would rebuild, just because. $4000 for everything. Can ship anywhere, just ask and get a # for you. DM with questions. Will post up some pics soon. Thanks!


Per forum rules, please post a location.

Andrew

[DualQuadDave]

Bump!!!

[Kyle Simpson]

How many miles on setup? Have you seen it run?

[DualQuadDave]

How many miles on setup? Have you seen it run?

165/175k on both. Have not seen them run, but came from solid sources I have gotten lots of other motors/trannys from and I have pulled pans/fluid etc and both are used, but solid(motor is super clean inside). For the $$$ for what you get, it's a deal. I am on the verge of not selling it at all since I am half committed on buying a 76 Blazer 2wd project that this would be perfect for. If you have more questions, DM me.

[DualQuadDave]

Ho Ho Bump!

[DualQuadDave]

Bump!!!

[DualQuadDave]

Bump!

[DualQuadDave]

Bump!