1970 Chevy blazer 2wd full custom build

[classiccarcustoms]

1970 Chevy blazer 2wd. with a 68 front clip.
-re worked 6.0LS
-PSI stand alone harness.
-PSI stand alone ECM.
-PSI stand alone TCM.
-Holley belt set up with A/C.
-Coated headers.
-Rebuilt 4L80 transmission.
-20" American racing wheels with new Nitto tire. 20x12 rear with 315-35-20 rear tire.
-Full custom 1 off frame front to rear. Corvette C4 IRS rear, C4 IFS front with rack and pinion steering and LG Corvette Billet C5/6 spindles.
-4 wheel power disc brakes.
Blazer does start, stop and steer. It is a project. 90% of the body work is done and almost ready for paint.
Top is great shape.

I have the original side glass and window windows installed.

-New rear roll pan.
-New front bumper and brackets.
-New outer door handles.
-New Lock cylinder kit.
-New complete grill assembly.
-New headers, 02 sensors, Borla stainless mufflers.

Blazer needs exhaust, paint, interior and fuel tank. It has a small fuel tank in the back and pump right now so I can start it and move it around.

SOLD

Location is St George UT.

These are old pictures.
New ones coming this weekend.


I will get picture this weekend.199869199870199871

[Alwhite00]

That Sir is bad ass. GLWS

[classiccarcustoms]

Thank you
Mandrel bent frame. With IRS, IFS.
199907199908199909

[classiccarcustoms]

Current pictures 199943199944199945

[dhutton]

Who built the frame etc?

Don

[classiccarcustoms]

I bought it with this frame.
Frame is very nice. What makes it very nice is if you need a control arm 10 years later you can buy one at parts store.
Welds and mandrel bend is amazing. I have had many car, trucks with DSE and Roadster shop Chassis, this one is that quality or above.
I was told the motor was freshened up and trans was rebuilt when I bought it.
I bought a stand alone PSI wiring kit, ECM, TCM and complete kit with pedal, o2 sensors, MAF sensors and wired it all in so it starts and moves on its own.
Installed power brakes, so it stops great. Installed new Holley belt kit.
I have a bunch of new parts to go with it. I just ordered borla mufflers and new body bushing kit today.
I took it to a couple body shops around here yesterday, if not sold in a couple weeks I will have it painted.

If someone wants it less motor and trans. I can do that as well. Its not going to be a crazy savings but I know some guys have a motor and trans laying around waiting for a build.

I took 3 videos of the blazer this weekend. I can send them to serious buyers. I have ones of it running as well.

It is running LG corvette C5/C6 front Billet spindles.
I also have a set of ZL1 6 pistons brakes that can go with it.

[cam1968327]

Current pictures 199943199944199945

So cool! Very nice chassis.

[classiccarcustoms]

Installing some Borla stainless mufflers today so it’s not so load.
Lol200033200034200035

[dhutton]

Is that wiring as close to the exhaust pipe as it looks? Not nitpicking just hate to see it melt.

Great project.

Don

[classiccarcustoms]

Nope picture just amplified it. Plus everything is just in for mock up. Hints why frame is raw.

[classiccarcustoms]

200230200231

[classiccarcustoms]

Pending
Update.
Buyer couldn’t come up with the rest of the money.
Back on the market

[chuckd71]

Very cool.

[dhutton]

Any pics of the dash and interior etc?

Don

[classiccarcustoms]

At the price posted above, You will have to provide your own seats.
Dash is un cut factory dash. After painted you would need to replace all dash pieces anyway. Current condition only has glove box installed and ignition switch and factory steering column.


I have factory buckets, center console and everything new for the dash at an extra cost.

[classiccarcustoms]

Saturday bump

[classiccarcustoms]

https://youtube.com/shorts/3vndZabbUVg?feature=share

200794200795200796200797

SOLD!