ca_preston
05-04-2022, 12:50 PM
199535
New From Creative Werks Inc.
https://creativewerksinc.com/godzilla-lo-pro-intake/
In the process of building our "Foxzilla" foxbody mustang we have designed and began manufacturing our own billet intake with built-in intercooler from VMP Performance // PWR to handle up to 1400hp.
In our design process one thing we've noticed on the entire Godzilla motor package is the rather tall plastic intakes from ford (designed for longer runner lengths). If you're looking to swap the motor into a smaller vehicle such as a cobra kit car or foxbody mustang the overall height can be a limiting factor. Since this intake is designed for boosted applications we were able to utilize the large valley area and suck down the entire intake 1.75" compared to the factory intake.
https://www.youtube.com/watch?v=NitDHR77gic&t=39s
[B]Features:
This core design is an upgraded version of the 2020 GT500 intercooler brick – C&R / PWR 81mm core, will support 1,400 hp
1.75″ shorter than OEM Intake
1” ports from cooler
-12 ORB Fitting Ports for Intercooler pump
(2) ¼ NPT Ports for Sensors on pressure side after intercooler
Available for LS Style throttle body 105 mm or smaller, or Ford Style [7.3L Godzilla & Coyote style] Throttle Body
Includes:
Assembled Intake + Core
Mounting Hardware
Intake Gaskets
199536
New From Creative Werks Inc.
https://creativewerksinc.com/godzilla-lo-pro-intake/
In the process of building our "Foxzilla" foxbody mustang we have designed and began manufacturing our own billet intake with built-in intercooler from VMP Performance // PWR to handle up to 1400hp.
In our design process one thing we've noticed on the entire Godzilla motor package is the rather tall plastic intakes from ford (designed for longer runner lengths). If you're looking to swap the motor into a smaller vehicle such as a cobra kit car or foxbody mustang the overall height can be a limiting factor. Since this intake is designed for boosted applications we were able to utilize the large valley area and suck down the entire intake 1.75" compared to the factory intake.
https://www.youtube.com/watch?v=NitDHR77gic&t=39s
[B]Features:
This core design is an upgraded version of the 2020 GT500 intercooler brick – C&R / PWR 81mm core, will support 1,400 hp
1.75″ shorter than OEM Intake
1” ports from cooler
-12 ORB Fitting Ports for Intercooler pump
(2) ¼ NPT Ports for Sensors on pressure side after intercooler
Available for LS Style throttle body 105 mm or smaller, or Ford Style [7.3L Godzilla & Coyote style] Throttle Body
Includes:
Assembled Intake + Core
Mounting Hardware
Intake Gaskets
199536