Wanted - stalled 67-69 Camaro project

[mjschneidy]

Looking for a stalled project to complete. Interest are more toward an auto-x or track build and less show car queen. What’s out there? This car pictured is what I should have bought, body done, road race suspension, LS3, just needed final assembly. Have cash and ready to buy. I’m in SE Michigan
Thx, Mike

Edit — to clarify I do want the finished project to be very much streetable. My vision is a classic stock appearing body with an open track capable chassis, brakes, wheels/tires, etc. Interior mostly stock but smartly updated.

196599

[payne]

I've got a sadly neglected 1969 Camaro in my garage that I might be willing to part with. Custom widebody, full cage, no interior, healthy 406" that put down 477 hp and 451 ft lbs at the rear wheels. It has a Viper T-56 6 speed trans, full Global West Cat 5 suspension, fire suppression system, fuel cell, etc.

The car was originally built by Kardell Customs in 2004 to run the Silver State Classic, which it did in 2005. It then stayed in a warehouse until early 2013 with 50 hours on it, got the wide body installed by MeanStreet, then I've only put a few hours on it before I became the CEO of a company and have not had any time for the car.

I was converting over to a Holley Sniper EFI during COVID, but I have no idea when I'll be able to finish.

It's stupid fun to drive on the street and the track.

I can DM you a build thread and pictures if you're interested.

[mjschneidy]

Yes I would be interested in taking a look. Might be a bit more “race car” than I’m looking for but things can always be changed.

[JuStBlAzIN]

I've got a sadly neglected 1969 Camaro in my garage that I might be willing to part with. Custom widebody, full cage, no interior, healthy 406" that put down 477 hp and 451 ft lbs at the rear wheels. It has a Viper T-56 6 speed trans, full Global West Cat 5 suspension, fire suppression system, fuel cell, etc.

The car was originally built by Kardell Customs in 2004 to run the Silver State Classic, which it did in 2005. It then stayed in a warehouse until early 2013 with 50 hours on it, got the wide body installed by MeanStreet, then I've only put a few hours on it before I became the CEO of a company and have not had any time for the car.

I was converting over to a Holley Sniper EFI during COVID, but I have no idea when I'll be able to finish.

It's stupid fun to drive on the street and the track.

I can DM you a build thread and pictures if you're interested.

This car sounds bad a$$- Can you post pictures? Just want to see the wide body.

[payne]

Yes I would be interested in taking a look. Might be a bit more “race car” than I’m looking for but things can always be changed.

There's no reason you can't put more of an interior in it!

Here's some pictures:
https://lateral-g.net/forums/showpost.php?p=563962&postcount=14

Here's a build thread:
https://lateral-g.net/forums/showthread.php?t=45491


This car sounds bad a$$- Can you post pictures? Just want to see the wide body.

It's really well done and subtle. Would be hard to see if you did not know it was there!

[mjschneidy]

Payne - Thanks for offering it up. Love the subtle wide body execution, I’ll keep it in mind.

[JuStBlAzIN]

That’s a super cool ride!

[mjschneidy]

Still looking, would consider just a painted or paint ready shell.

[zachwild101]

text me we might be able to make a deal 520-289-5544

[71maroesteban]

Still looking, would consider just a painted or paint ready shell.

I’m selling my 1969 camaro shell with mini tubs installed let me know if you are interested

[mjschneidy]

I’m selling my 1969 camaro shell with mini tubs installed let me know if you are interested

Hey Esteban, we chatted a bit through messenger a few weeks ago. Did you sell the chassis parts separately already?

[Kyle Simpson]

$52k

Car is a fuel pump and few ground/power wires from starting. Needs brake lines and interior. Bumpers need paint.

Minitubbed
Ridetech 4link
12 bolt
Ridetech tru turn
Ridetech strong arms
Ridetech coilovers
Built LS1 4l60e
Wilwoods
Rocket Attack 18x10 all around
Shaved firewall
New paint
New lights
New trim
New smoke glass

864 597 6885
Spartanburg SC
Kyle
198255

[Impala67]

PM Sent

[JoseSS]

67 camaro v8 car
Weld wheels are gone.
Been waiting for an ls3 6 speed manual deal but nothing comes up.

27k$198999199000199001199002199003199004199005

[mjschneidy]

Still looking, what’s out there?

[zachwild101]

send me a text or call me 520-289-5544 i have a 1967 camaro wuth a full tci chassis and a ton of parts

[srode]

Still looking, what’s out there?

There's a 67 on team Camaro you might be interested in.

[mightymouse713]

I am considering parting ways with my '68199824199825 project. Health reasons have changed my priorities.

[mjschneidy]

Still looking. Prefer body done and painted or paint ready.

[CSG]

I sent you a PM but not sure it went through as it locked up

[Modo Innovations]

https://lateral-g.net/forums/showthread.php?t=59531

[mjschneidy]

Why are all the ones close to what I’m looking for so far away ?! Lots of project cars in Texas. Still searching…..

Texas is not out of the question but I’m holding out for something closer to home for now. Thanks for all the replies, keep them coming