Brocal
10-10-2021, 02:04 PM
Asking 110K or best offer.
192550
192549
After much consideration I am putting my Pro touring 69 Camaro up for sale.
This was built with all top-of-the-line parts and pieces.
Frame off resto - mods and rust were taken care of by Metalworks Speed Shop in Eugene, Oregon. The entire body was sandblasted down to bare metal. Hundreds of photos were taken throughout the build process, including pictures of the firewall, rocker panels, tail panel, floor, sub-frame connectors, etc.
Specs: 1969 Camaro clean California title in my name. Located near Lake Tahoe, California.
-LS3 - BRAND NEW - new aluminum block, cammed, CNC ported heads, forged K1 H beam rods, forged Racetec pistons with massive valve reliefs, Total Seal piston rings, Comp Cams aluminum roller rockers 1.72 ratio, 1 7/8" Doug's long tube headers, full 3" exhaust with X pipe and Borla Pro XS mufflers
-New T56 Magnum close ratio gear box
-Ford 9" rear end - upgraded Strange Nodular iron third member, Detroit Locker with 25 lb autocross racing springs, 31 spline axles, 3.70 gears
-3" Steel chromoly driveshaft
-Holley Terminator X Max EFI system w/DBW throttle
-Tanks Inc baffled EFI tank with in tank pump and floatless fuel sending unit
-No Limit Engineering Sniper IFS front subframe with adjustable upper control arms
-Art Morrison Tri 4 bar rear subframe
-JRI coilovers front and rear
-Detroit speed mini tubs
-Anvil Auto Carbon fiber inner wheel wells, fiberglass rear spoiler
-Full Autometer dash and gauges
-Bluetooth Alpine stereo with hands-free talk
-Wilwood Forged Narrow Superlites 6/4 piston front and rear with 13" rotors
-Wilwood triple master cylinder pedals with balance bar for fine tune adjustment
-BC Forged custom 2 piece forged wheels 18"x11" front, 18"x12" rear
-Toyo Proxes R88R tires - 315/30R18 front, 335/30R18 rear
-Vintage Air Surefit kit heat and AC
-Coleman racing square power rack and pinion steering
-TMI black suede interior headliner
-Southern Polyurethane Single Stage gloss black paint
-Detroit speed parts - electric hideaway headlight door kit, headlights, fender braces, hood latch, select-a-speed-wiper kit
-Fesler parts - hood hinges, trunk hinges, door handles, stainless door strikers, driving lights, door jamb vents,
-Marquez design tail lights
-American Autowire witing harness - trunk mount fuse panel
-Optima Red top battery - trunk mount
This build is entirely new and freshly finished this month. This has been a 6 year build. It was shown at Hot August Nights in Reno, Nevada two months ago. The motor only has 500 miles on it so far mainly from taking it to Hot August nights. The motor likely needs another 500-1000 miles on it before being professionally dyno tuned. Based on the parts list on this motor it should dyno over 500 horsepower and torque to the rear wheels. It has a conservative base tune currently.
Please see my build page for the car on Instagram @dreamcamarobuild
I will be posting more photos and videos of this car as well.
Asking 110K or best offer
https://bringatrailer.com/listing/1969-chevrolet-camaro-105/
Auction did not meet reserve
192550
192549
After much consideration I am putting my Pro touring 69 Camaro up for sale.
This was built with all top-of-the-line parts and pieces.
Frame off resto - mods and rust were taken care of by Metalworks Speed Shop in Eugene, Oregon. The entire body was sandblasted down to bare metal. Hundreds of photos were taken throughout the build process, including pictures of the firewall, rocker panels, tail panel, floor, sub-frame connectors, etc.
Specs: 1969 Camaro clean California title in my name. Located near Lake Tahoe, California.
-LS3 - BRAND NEW - new aluminum block, cammed, CNC ported heads, forged K1 H beam rods, forged Racetec pistons with massive valve reliefs, Total Seal piston rings, Comp Cams aluminum roller rockers 1.72 ratio, 1 7/8" Doug's long tube headers, full 3" exhaust with X pipe and Borla Pro XS mufflers
-New T56 Magnum close ratio gear box
-Ford 9" rear end - upgraded Strange Nodular iron third member, Detroit Locker with 25 lb autocross racing springs, 31 spline axles, 3.70 gears
-3" Steel chromoly driveshaft
-Holley Terminator X Max EFI system w/DBW throttle
-Tanks Inc baffled EFI tank with in tank pump and floatless fuel sending unit
-No Limit Engineering Sniper IFS front subframe with adjustable upper control arms
-Art Morrison Tri 4 bar rear subframe
-JRI coilovers front and rear
-Detroit speed mini tubs
-Anvil Auto Carbon fiber inner wheel wells, fiberglass rear spoiler
-Full Autometer dash and gauges
-Bluetooth Alpine stereo with hands-free talk
-Wilwood Forged Narrow Superlites 6/4 piston front and rear with 13" rotors
-Wilwood triple master cylinder pedals with balance bar for fine tune adjustment
-BC Forged custom 2 piece forged wheels 18"x11" front, 18"x12" rear
-Toyo Proxes R88R tires - 315/30R18 front, 335/30R18 rear
-Vintage Air Surefit kit heat and AC
-Coleman racing square power rack and pinion steering
-TMI black suede interior headliner
-Southern Polyurethane Single Stage gloss black paint
-Detroit speed parts - electric hideaway headlight door kit, headlights, fender braces, hood latch, select-a-speed-wiper kit
-Fesler parts - hood hinges, trunk hinges, door handles, stainless door strikers, driving lights, door jamb vents,
-Marquez design tail lights
-American Autowire witing harness - trunk mount fuse panel
-Optima Red top battery - trunk mount
This build is entirely new and freshly finished this month. This has been a 6 year build. It was shown at Hot August Nights in Reno, Nevada two months ago. The motor only has 500 miles on it so far mainly from taking it to Hot August nights. The motor likely needs another 500-1000 miles on it before being professionally dyno tuned. Based on the parts list on this motor it should dyno over 500 horsepower and torque to the rear wheels. It has a conservative base tune currently.
Please see my build page for the car on Instagram @dreamcamarobuild
I will be posting more photos and videos of this car as well.
Asking 110K or best offer
https://bringatrailer.com/listing/1969-chevrolet-camaro-105/
Auction did not meet reserve