Ryeguy's Garage Sale

[ryeguy2006a]

Hey all,

I'm cleaning out my garage, now that the Camaro project has pretty much wrapped up. I'm going to list a bunch of parts as I find them. I'll start off with a few items that I have pictures of. I'll add more stuff as I find it. All items are plus shipping unless specified as shipped.

Edelbrock Performer 2.0 intake It's in good condition other than one of the mounting tabs are broken. I was told this only had a few hundred miles of run time before the tab broke when someone was pulling the motor. Could be a quick fix for someone, or a good intake to modify for EFI. Retail is $340.95 on Jeg's right now. I'd take $125

https://static1.pt-content.com/images/pt/2021/10/49942298237_18945ce251_b-1.jpg

https://static1.pt-content.com/images/pt/2021/10/49941482883_a795ebee8f_b-1.jpg

https://static1.pt-content.com/images/pt/2021/10/49942304757_1d6626dddb_b-1.jpg

Two sets of short spindles with drum hubs off of 67-69 Fbody's. These are perfect starting points for an LS1 or C5/C6 front brake conversions. Will separate the spindles or hubs. $40 each pair. Will sell the drums, but they are super heavy.

https://static1.pt-content.com/images/pt/2020/05/49942038571_b3d605720e_b-1.jpg

https://static1.pt-content.com/images/pt/2020/05/49942309622_d4e8781f07_b-1.jpg

https://static1.pt-content.com/images/pt/2020/05/49941997781_2e0b52ec13_b-1.jpg


LS3 Cam kit for Gen4 motors. I have a stock LS3 cam, Blue LS3 springs and all hardware, 1 bolt 4x cam gear and the center cam bolt. Cam is from a crate motor and the springs have unknown mileage. $125

I'll update this tonight when I go through my other parts.

Thanks,
Ryan

[232_ray]

Where are you located??

[ryeguy2006a]

Near Ithaca, NY. I'll add that up top in the ad. Thanks for reminding me.

[nebdrummer]

Dang, wish the seats were closer. Got the back seat too?

[IMPALAMAN1]

ill take the horn ring

[ryeguy2006a]

Nebdrummer, where are you located? I'm only selling the front seats. The rears are going to be recovered to match my new front seats.

Pm'd you Impalaman1

[nebdrummer]

I'm in Nebraska.

[ryeguy2006a]

Horn button sold!

[ryeguy2006a]

I found a bunch more parts. Helps me clean up and fund my project.

Truck Idler - $5
SS/WS6 good working order PS cooler - $15
Truck Idler relocation - $10
98-02 Fbody PS hose bent to fit a 68 Camaro PS box. $20
98-02 Clutch MC u bolt - $5
Sensor adapter and Steam port fitting $5
LS1 throttle cable bracket w/ bolts $25
98-02 Fbody PS bracket w/ pulley $25

Or take everything for $70 plus shipping.

https://static1.pt-content.com/images/pt/2021/12/51729494560_1a207b2e77_b-1.jpg

Misc. Pontiac and GM parts

Parts from an 8k tach that was in my 76 T/A. $20 shipped

https://static1.pt-content.com/images/pt/2021/12/51728859053_23ef25f07b_b-1.jpg

LS3 Coil brackets $20
Gen3 Rocker stands $20

https://static1.pt-content.com/images/pt/2021/12/51728859413_7e58f0aba1_b-1.jpg

Gen3/4 LS Engine covers.

Valve covers one pair left. $25
Rear cover $20 each
Gen3 timing cover $20

Take everything for $60 plus shipping

https://static1.pt-content.com/images/pt/2021/12/51727802182_134bcd5ba6_b-1.jpg

https://static1.pt-content.com/images/pt/2021/12/51727802272_f5c2f8be0b_b-1.jpg

https://static1.pt-content.com/images/pt/2021/12/51728859653_da26902d11_b-1.jpg
​​​​​​​

[ryeguy2006a]

12 bolt cover and one pair of valve covers sold

[Jonathonar89]

I’ll take the SBC motor mounts and flywheel tool if no one else has spoken for them.

[ryeguy2006a]

Mounts and flywheel tool sold!

[ryeguy2006a]

Parts list has been updated. Only the parts listed are available.

[beyonda68]

Throttle cable bracket if its still around

[ryeguy2006a]

Pm sent.