Jon's parts/garage clean up sale (LS swap, F-Body, etc.)

[Jonathonar89]

Hello,

Below is a list of parts I have available. I have deleted all my previous sale posts and I'm now keeping everything listed on this thread. I will review and adjust as available/needed.

-Spectre low profile drop-base air cleaner for Holley style carburetors $100 shipped (US only)
Airbox Kit (spectreperformance.com) (https://www.spectreperformance.com/98625-spectre-airbox-kit)
https://static1.pt-content.com/images/pt/2021/08/51374443720_b790b01696_z-1.jpg (https://flic.kr/p/2mgMsg3)Untitled (https://flic.kr/p/2mgMsg3) by Jonathon Randolph (https://www.flickr.com/photos/156619454@N04/), on Flickr


-UMI solid motor mounts for 1974-1981 F-Body SBC applications. Picture on the left below. $80 shipped (US only)
-Generic solid SBC mounts. Middle of picture....SOLD
-PTFB solid motor mounts for Pontiac engines. Picture on the right below. $40 shipped (US only)
1973-1981 GM F-Body SBC Solid Engine Mount Kit - UMI Performance Inc. (https://www.umiperformance.com/home/product/sbc-solid-engine-mount-kit/)
https://static1.pt-content.com/images/pt/2021/08/51372894668_b4c94476b8_z-1.jpg (https://flic.kr/p/2mgDvMf)Untitled (https://flic.kr/p/2mgDvMf) by Jonathon Randolph (https://www.flickr.com/photos/156619454@N04/), on Flickr

-Speedway Motors coilover control arm reinforcements for 1967-1969 F-Body. $30 shipped (US only)
https://static1.pt-content.com/images/pt/2021/08/51373436876_dc84ef056c_z-1.jpg (https://flic.kr/p/2mgGhXE)Untitled (https://flic.kr/p/2mgGhXE) by Jonathon Randolph (https://www.flickr.com/photos/156619454@N04/), on Flickr

-Quadrajet Carburetor with Edelbrock adapter plate for squarebore intake manifolds $200 shipped (US only)
https://static1.pt-content.com/images/pt/2021/08/51372678037_bf50f9fe6c_z-1.jpg (https://flic.kr/p/2mgCpoe)Untitled (https://flic.kr/p/2mgCpoe) by Jonathon Randolph (https://www.flickr.com/photos/156619454@N04/), on Flickr

Built up LS1 that has been dressed to look like a classic Pontiac engine. I have about $7,000 into the engine. Build finished this year but has not been broken in yet.

-Aluminum LS1 block
-SDPC LS6 Power Max Plus Cam
-LS6 style 799 heads
-CHE trunnion kit
-JE Forged 3.905" pistons
-Eagle rods
-ARP bolts throughout
-Block/heads drilled and tapped for bigger 1/2" ARP head studs
-C5 Corvette oil pan
-Improved racing oil pan trap door kit
-Improved racing crank scraper
-Sac City Corvette billet oil diverter
-LS7 hydraulic lifters
-LS3/LS7 style clutch
-Block clearanced for LS6 valley breather system (included)

$4500 for the long block
$6500 for the engine with brand new Holley EFI and intake manifold

Feel free to ask any questions.

https://static1.pt-content.com/images/pt/2021/09/51147561991_c7eeff7894_z-1.jpg (https://flic.kr/p/2kVJCe6)Untitled (https://flic.kr/p/2kVJCe6) by Jonathon Randolph (https://www.flickr.com/photos/156619454@N04/), on Flickr


Holley Terminator EFI 550-410

Get all the great features of Terminator Throttle Body Fuel Injection systems in a bolt-on system for GM's popular LS engines! These systems are designed specifically for LS engines with carbureted style intake manifolds. All kits include the popular Terminator EFI Throttle Body for fuel delivery into the intake plenum, as well as the necessary wiring to plug directly into the factory LS coil sub-harnesses and factory sensors.
Features:
Hard Core Gray anodized finish for great looks and corrosion protection
For GM LS1/LS6 Engines & 1999-2007 4.8/5.3/6.0 Truck Engines with 24x crank reluctor and carbureted intake manifold
Plug and play with factory sensors and coil sub-harnesses
Bosch wideband oxygen sensor included
Controls fuel and spark
Pre-calibrated for no-hassle installation and tuning
Fully adjustable through included 3.5” full color touchscreen

$2300

https://static1.pt-content.com/images/pt/2021/06/51222388969_11451f6c87_z-1.jpg (https://flic.kr/p/2m3m8Fp)Untitled (https://flic.kr/p/2m3m8Fp) by Jonathon Randolph (https://www.flickr.com/photos/156619454@N04/), on Flickr

Let me know if you're interested in anything or have questions.

Thanks,

Jon

[ryeguy2006a]

I'm surprised that Holley Kit hasn't sold yet. GLWS.

[Jonathonar89]

I'm surprised that Holley Kit hasn't sold yet. GLWS.

I hear you on that,


I think this Holley 550-410 setup has flown under the radar for guys LS swapping into old muscle cars. I have seen very few people use this kit. Although pricey, this setup makes it much easier to swap an old carb car in my opinion. The carb style throttle body allows use of original carb style throttle cable, wiring/tuning is simplified over converting a GM system, etc.

If anyone is interested in the EFI kit but may not have full payment up front, I can offer to do a PayPal invoice to allow for partial payments. I fully understand and realize many people don’t have a couple thousand to spend at any given moment so, again, I can accommodate a payment option there.


Thanks,

Jon

[KAN KAN Speedshop]

PM Sent

[Jonathonar89]

Mechanical clutch bracket and intake sold.

Payment pending for the Sloppy Mechanics harness.

The rest of this post has been adjusted to what is currently available.

[Jonathonar89]

Holley EFI parts (not sold) have been removed from listing until further notice. I’m going to be doing some testing and will hold off sale on those products for the moment.

Ad has been edited for what is currently available.

[Jonathonar89]

PTFB clutch bracket sold.

I might be adding the Holley efi back for sale. Comparing efi and carb setup at the moment.

[KAN KAN Speedshop]

PM Sent

[Jonathonar89]

Revolution electronics fuel controller, Daytona LS engine ignition controller and PTFB hydraulic clutch bracket sold.

Holley EFI not available.

I may have some more parts to adjust this thread soon.

Thanks,
Jon

[Jonathonar89]

Thread updated,


I have decided to list my built LS1 and associated parts. I've decided to put my Firebird project on hold due to an accident I had this week. Unfortunately had to have a surgery on my hand two days ago, out of work for the next month, bills will be rolling in soon, etc. I will be adding more for sale soon.


Thanks for looking,

Jon

[Jonathonar89]

Bump on an old post. If anyone is interested in my built LS1 or Holley EFI, let me know.

Still in as-new condition.