PDA

View Full Version : Fitting for 99 vette fuel regulator quick dissconect



ilovefirstgens
12-30-2005, 11:59 PM
Well something like whats pictured on the bottom right, to fit in the female fuel outlet to the rails. But if possible something from jegs or summit, i need the part super fast as its holding me up from having the fuel system done.

https://static1.pt-content.com/images/noimg.gif

gEtyOpAPiOn
01-01-2006, 09:23 PM
Napa Auto Parts Sells All Those Connections ...like 9.99 Ea ....they Have The Quick Disconnects And Hard Plastic Lines

MrQuick
01-06-2006, 11:26 PM
Any parts numbers Rick?

gEtyOpAPiOn
01-07-2006, 08:02 PM
dont know the part numbers but they have plenty ...for ford gm and chrysler ...they have them by the oil caps and trailer lights ...well at least where i live hehe... are you doing an ls1 ?

Ron S
01-09-2006, 12:49 PM
They are Dorman brand quick connect repair kits,I know the straight 5/16 is a 800-120 I don't know what the 3/8 is.I used regular fuel injection hose and clamps and clamped it on both sides of the rib on the fuel rail,worked fine.done it on 5or6 cars.

MrQuick
01-12-2006, 03:36 PM
are you doing an ls1 hi rick, yes i am...well 2 to be exact.Next time your out there grab me a bunch and stop buy,i'll buy the pizza! :) I maybe going carbed on mine. thanks for the pn's hemi.

protour_chevelle
01-12-2006, 04:28 PM
hi rick, yes i am...well 2 to be exact.Next time your out there grab me a bunch and stop buy,i'll buy the pizza! :) I maybe going carbed on mine. thanks for the pn's hemi.

*Cough* Take your pick, Nylon(allows use of clamping fuel hose on) or steel(needs to be hydraulically pressed on)

http://www.fmsiinc.com/steel-quick-disconnects.htm

http://www.fmsiinc.com/nylon-fuel.htm

Any decent autoparts store should have a FMIS catalogue...

-Matt