slacker1965
04-24-2021, 10:38 AM
located in Charlotte, NC
$17,500
Bodywork done & in epoxy primer, By Quality Auto Painting in Charlotte, block & choose your color.....
OE tin except for the 1/4's, cowl hood & decklid
Have OE side glass, aftermarket windshield. have manual regulators, missing some hardware.
Have new aftermarket w/s trim etc.
2001 Vette wheels & tires(kinda crusty) proves fitment....
manual top bows painted & fitted.
Custom chassis from firewall back by FlyingHammer in Lincolnton, NC.
2005 GTO IRS
Stock Clip, has true coilovers all around
Global west arms, upgraded spindles
2001 Vette brakes in front, GTO disc in rear
Big Front bar, stock GTO in rear
IROC box
355 4bolt sbc with alum heads, dual plane intake & edelbrock carb
700r4
has GM serpentine ft drive
motor run in on test stand.
Car has all lines plumbed
interior tin done & in epoxy
underside done in satin black & herculiner
have crusty OE inner fenders that need to be widened for tire clearance
have nice OE '67 grill assy
have custom glass rear wing
needs wired, bled & fluids to run
glass not installed
ready for you to pick your colors & finish.
you can't buy a aftermarket tub for what I'm asking for this almost running, rolling car187515187516187517187518
I have more construction pix...
thanks for your interest
$17,500
Bodywork done & in epoxy primer, By Quality Auto Painting in Charlotte, block & choose your color.....
OE tin except for the 1/4's, cowl hood & decklid
Have OE side glass, aftermarket windshield. have manual regulators, missing some hardware.
Have new aftermarket w/s trim etc.
2001 Vette wheels & tires(kinda crusty) proves fitment....
manual top bows painted & fitted.
Custom chassis from firewall back by FlyingHammer in Lincolnton, NC.
2005 GTO IRS
Stock Clip, has true coilovers all around
Global west arms, upgraded spindles
2001 Vette brakes in front, GTO disc in rear
Big Front bar, stock GTO in rear
IROC box
355 4bolt sbc with alum heads, dual plane intake & edelbrock carb
700r4
has GM serpentine ft drive
motor run in on test stand.
Car has all lines plumbed
interior tin done & in epoxy
underside done in satin black & herculiner
have crusty OE inner fenders that need to be widened for tire clearance
have nice OE '67 grill assy
have custom glass rear wing
needs wired, bled & fluids to run
glass not installed
ready for you to pick your colors & finish.
you can't buy a aftermarket tub for what I'm asking for this almost running, rolling car187515187516187517187518
I have more construction pix...
thanks for your interest