18" Fikse Three-Piece Wheels

[jebarco1]

Fikse Three-Piece Wheels (https://www.fikse.com/about-us#About-Us)

Fiske Profil5s Three-Piece, Aerospace grade 6061-T6 Forged Aluminum Wheels
GM 5x4.75" bolt pattern
Fronts: 18" x 10.5" / 6.5" backspacing
Rear: 18" x 12.5" / 6.5" backspacing

Tires (Brand New )

Front : Nitto 555 285 /30/ 18
Rear: Nitto Drag Radial 335/30/18

3500$ - location in atlanta , GA

181078181079181080181081181082181083

[cwylie]

FYI I think your backspace numbers are a .25 inch off. You measure to the inside of the lip not the back of the lip. Generally, that's about a .25 inch.

NICE WHEELS!

[dhutton]

FYI I think your backspace numbers are a .25 inch off. You measure to the inside of the lip not the back of the lip. Generally, that's about a .25 inch.

NICE WHEELS!

Are you sure about that? Backspacing includes the lip afaik...

Google it...

Don

[cwylie]

I thought it was to the inside of the lip. Kinda like a 12 inch wheel is actually 13 inches wide if you measure from outside to outside. I could be wrong.

[ICrombie]

I thought it was to the inside of the lip. Kinda like a 12 inch wheel is actually 13 inches wide if you measure from outside to outside. I could be wrong.

BS is the distance from the hub mounting surface to the inner lip edge. And yes, a 12 inch wheel is 13 w/ the lips, so a hub that is dead center in the wheel would have a backspace of 6.5 inches instead of 6.

[badazz81z28]

These are the wheels I originally wanted on my car....too bad the BS is wrong for me.

[Qik66]

What car were they originally ordered for?

[badazz81z28]

What car were they originally ordered for?



Like all cars here....a 1st Gen Camaro? I'm just joking....I don't know.

[redbull396]

Would love these for my 67 camaro, but fronts are too wide.

[jebarco1]

I have these on a chevelle.

181127

[jebarco1]

Here is a link to get replacement barrels for these wheels for the front. I will lower price to 3200 for the camaro guys. Let.me know. https://shop.wheelflip.com/collections/inner-barrels-custom-bore/products/18-step-lip-inner-for-fikse-fm-profil?variant=47513369482

[cam1968327]

I have these on a chevelle.

181127

Holy Crap Batman! Lots going on Under the hood of that Chevrolet! Nice!

[holschen]

You are correct on the bs. But you are wrong on the widht. You measure to the inside of the lip when messure widht so you need to remove 1" if you want to messure like you do.
And the lip is 0.5 inch not 0.25. And you got 2 lips equal 1inch.
backspace you count for 1 lip equal 0.5 inch.

[jebarco1]

The measurement is correct. The measuring tape is sitting on a inch width roll of tape.. thanks for all the information everyone . Keep me.posted if interested. Since my chevelle is going to be painted black going silver lip ga3r.

[540' chevelle]

I have a 1970 Chevelle these wheels will fit a stock suspension Chevelle. Looks like in picture like you have a spacer correct. I do not care if it has a
spacer please let me know.

[jebarco1]

The picture below is with a stock rear end 61". I since have notched the frame , mini-tubbed and add a dana60s at 58" end to end. [ the picture from the front]
183200

[jebarco1]

more pictures on stock frame and rear.. 183201183202

[Erik Beckett]

Wonder how much to ship to Ohio?

[Erik Beckett]

PM sent

[Erik Beckett]

PM’d you an offer

[Erik Beckett]

Sent you a PM with offer

[Erik Beckett]

PM again

[PHXSPEED]

I’ll take them for $3200