Lingenfelter LSA Dowel Pin Jig

[ryeguy2006a]

I bought an LSA Supercharger and would like to drill my 821 heads ideally for the different location for the dowel. Let me know if you have one I can either rent or buy.

Thanks,
Ryan

[csouth]

Honestly, lots of people just chisel it off. That's what I did...

[ryeguy2006a]

Thanks man, I'll have to go through your thread and see if I can pick up any pointers from your LSA install. That's what I've read on many sites, but I would prefer to find the jig and drill it. If I can't find one in the next few months, I'll end up making my own jig to drill the head. I'd just prefer to find one so I don't have to spend my time building one.

[js8507121]

I have someone that have this for sale in good condition you can shoot him a pm if interested @ [email protected]

[Samckitt]

Honestly, lots of people just chisel it off. That's what I did...

I looked into renting a jig to drill the pocket, but everyone told me just to break off the pin. It is very brittle & can be broken off easily.

[csouth]

Thanks man, I'll have to go through your thread and see if I can pick up any pointers from your LSA install. That's what I've read on many sites, but I would prefer to find the jig and drill it. If I can't find one in the next few months, I'll end up making my own jig to drill the head. I'd just prefer to find one so I don't have to spend my time building one.

I didn't update my thread here when I was doing the conversion, but I'd definitely be available to answer any questions you might have. Do you know the status of the isolator and the brick?