First gen camaro / firebird aluminum custom kickpanels

[frankv11]

I’ve been working on building these 1969 camaro custom .063” aluminum kickpanels and vent close out buckets housing that holds a 5.25” JL audio speaker with zero mods needed. buckets bolt right up to stock location , kick panel will need two #10 holes drilled into car structure
These are all hand made items and are a perfect fit . They will be black anodized or a fine wrinkle powder coated finish .

So the question is should I make some , is there a market for it ? Considering the labor and R&D on each they would be $1500 per assembly ( $750 /2 kickpanels $750/ 2buckets). its a bit pricey but lot of hours and attention to detail goes into each one and I believe on making it as best as possible

Check this link
https://youtu.be/Uakf-1_yJ1M
Any feed back is good [emoji16] c180922180923180924180925180926180927

[oleyeller]

Very well done, nice craftsmanship!

[thumper877]

Those are very cool. I think you could definitely sell them but the 1500 would be hard to do for most.

[LonghornJPS]

Wow, that’s outstanding work! I have to agree with Thumper, $1500 would be hard to do for most. But I wish I could....

[frankv11]

Thank you both for the input ,appreciate it [emoji106]

[C Presley]

Dude, those are beautiful pieces! I have to agree with the input of everyone, that the price point would be difficult for most.

[shelteredchevelle]

What else have you made for the build? Those are really nice.

[frankv11]

Dude, those are beautiful pieces! I have to agree with the input of everyone, that the price point would be difficult for most. , I guess I would have to find some more efficient way of reproducing or maybe offer a more price friendly design :)


What else have you made for the build? Those are really nice.

so I've decided to make a run of the kickpanels and buckets for sure.

im also the same guy that sells the first gen LS swap cold air intakes and the 1969 caamaro custom hood louvers
link to CAI
https://www.pro-touring.com/threads/130901-1969-68-67-camaro-Ls-swap-custom-cold-air-intake

https://www.pro-touring.com/threads/133719-Hood-louvers?highlight=hood+louvers+frank

[slammed68]

i'm too poor for these but I just wanted to say that you nailed it. The design is killer and the craftsmanship is seriously impressive, someone will buy them.

[astross89]

Amazing work. My dad has your louvers and loves it. I wish I had the funds. The kick panels are awesome. If I had the money ,I would definitely want your Holley dash panel setup

[frankv11]

Amazing work. My dad has your louvers and loves it. I wish I had the funds. The kick panels are awesome. If I had the money ,I would definitely want your Holley dash panel setup

Thank you slammed68 and astross89 , normally most of my clients are repeat clients , which I really appreciate and encourage me to keep the up quality and customer service at the top .

[frankv11]

So the first 2 extra sets are out the door. I will be making a run of these .63 3003 aluminum 1969 / first gen camaro / firebird kick panels $750/ pair . JL 5.25” .063” aluminum vent Closeout buckets are also $750/pair . Direct fit no modifications needed . For kickpanels you’ll just have to add to #10 holes . Fine wrinkle finished powder coated or black anodized . ——————————-_______ #customkickpanels #jlmicrosub #jlaudio #firstgencamaros #1969camaro #firebird #grayaresteelco #1967camaro #1968camaro #kickpanelspeakers #kickpanels
https://youtu.be/Wre0FsQfhvE


182223
180992180993

[frankv11]

Freshly brushed .063 aluminum custom kickpanels for your 1969 camaro /first gen camaro / firebird. Off to anodizing 182224


$750/ pair182226