Wilwood SLC56 Calipers

[F-Body International]

Wilwood C5/C6 Corvette calipers.

I ran these on my Trans Am but they should be good for anyone who has a Corvette or Corvette brake swap on their car. These are a fixed lug-mount (no slide bolts) 4 piston design. Still on my car but I will pull right after purchase.

Summit has these listed at $618.

I'll go $500 for my set.

https://www.summitracing.com/parts/wil-140-15173-r

https://static1.pt-content.com/images/pt/2020/07/50157634317_953eb0e1f7_c-1.jpg (https://flic.kr/p/2jqfZdz)Untitled (https://flic.kr/p/2jqfZdz) by Jonathon Randolph (https://www.flickr.com/photos/156619454@N04/), on Flickr

https://static1.pt-content.com/images/pt/2020/07/29457445598_ce56bf7369_c-1.jpg (https://flic.kr/p/LT47i5)Untitled (https://flic.kr/p/LT47i5) by Jonathon Randolph (https://www.flickr.com/photos/156619454@N04/), on Flickr

[TANKMASTERJ]

Do these fit the stock rotors or aftermarket necessary

[F-Body International]

Stock C5/C6 Corvette rotor size.

In the picture is a stock C5 rotor.

[TANKMASTERJ]

I got an 02 transam .
Did these bolt right up or require adapters?
Jason

[TANKMASTERJ]

By the way F Body International, are you the guy over. The F Body deal that happened in Memphis?
I was there and. Loved it but I sure thought the gear head community didn't support it well enough the last two years.
I hope it continues.
My build thread is Jason's 67 Camaro
Jason

[F-Body International]

I got an 02 transam .
Did these bolt right up or require adapters?
Jason

This would require use of an adapter bracket. In my case, the kit that I ordered came with a UMI bracket.

[F-Body International]

Sold