Camaro, Firebird, Nova, etc Hotchkis Rear Leaf Spring kit, DSE Front Sway Bar kit

[jwcarguy]

I have changed directions on a 69 Camaro build for my wife and have these new parts avilable


I have a brand new in the box Hotchkis Drop Rear Leaf Spring kit available
Part # 2407C
1.5" drop
from Hotchkis:
Hotchkis Sport Suspension 2407C 1967-1969 Camaro Firebird Sport Leaf Springs 1.5 in. Drop. Lower your 1967-1969 Camaro Firebird or 1968-1974 Nova and reduce roll and increase handling with our 1.5 in. lowered Sport Leaf Springs. Our Sport leafs represent the latest technology in performance spring. Our springs utilize a 3/4 length over load spring reducing axle wrap and feature urethane rear bushings and rubber front bushings offering both performance and comfort. Included are heavy duty shackles u-bolts spring pads and nut clips. Our sport leaf springs are designed to work on both Mono and Multi Leaf equipped vehicles. Lowers vehicle 1.5 in. from original ride height. Also Fits 68-74 Nova
only selling due to changing direction on build


$425 for new sport leaf spring kit SOLD!!



I have a new Detroit Speed Engineering (DSE) Front Sway Bar kit
kit Part # 031401
Fits 1967-69 Camaro , Firebird , 1968 -74 Nova (other X-body cars)

1 1/8" diameter w/ greaseable polyurethane bushings and end link kits

$225 for the DSE sway Bar kit SOLD!!

in Las Vegas, NV
will ship, contact me for shipping cost

pm/call/text (702)677-4085

[130fe]

Sent you a text Jeff.

[jwcarguy]

Sent you a text Jeff.

replied

[Steve68]

Nice floor....

[jwcarguy]

Nice floor....


Thanks Steve!
That is the floor in my shop

[bpmack16]

Shipping to 01844 on leaf springs

[jwcarguy]

Shipping to 01844 on leaf springs Honestly, it will be expensive to ship out to you (over $100) and I can't drop the price that much for it to work for either of us
I hope that you understand, if you were closer, I am sure could've came to a deal

Thanks for interest
Jeff

[Steve68]

Did you use epoxy?

I went with some Sherwin Williams concrete stain, if I remember right,

[jwcarguy]

Did you use epoxy?

I went with some Sherwin Williams concrete stain, if I remember right,

Steve,
yes I did use epoxy coating
I ground/ prepped the floor and used coating from Foundation Armor w/ anti-slip added to top clear coat
I used their UNT60 product, it is holding you great
https://www.foundationarmor.com/utn60

hope this helps
Jeff

[Camarowarrior71]

Shipping to 73065?

[jwcarguy]

Shipping to 73065?

Both are sold
Thanks