whats my 10 bolt 8.5 posi worth

[MAGONSTERZ68]

Hi yall,
Considering selling rear end but what is current market value for a Eaton posi limited slip Diff, 10 bolt, 8.5", 3:42 geared, drum brake, recent build approx 5k miles ago.
Currently installed and running in Calif.

[Alwhite00]

Hi yall,
Considering selling rear end but what is current market value for a Eaton posi limited slip Diff, 10 bolt, 8.5", 3:42 geared, drum brake, recent build approx 5k miles ago.
Currently installed and running in Calif.

you may want to mention what vehicle it fits.

[MAGONSTERZ68]

you may want to mention what vehicle it fits.
Rear end is out of 1968 Camaro, 60" flange to flange

[F-Body International]

The 8.5 10 bolt can handle a lot of power if properly prepared.

The main thing to get done is welding up that center section to the axle tubes.

Millerbuilt even offers a full floater kit for bolt-on Corvette brakes, hubs and axles.
https://millerbuiltusa.com/

[MAGONSTERZ68]

The 8.5 10 bolt can handle a lot of power if properly prepared.

The main thing to get done is welding up that center section to the axle tubes.

Millerbuilt even offers a full floater kit for bolt-on Corvette brakes, hubs and axles.
https://millerbuiltusa.com/

well as luck would have it I got a deal on a set of 3:73s with install going in today.
I’ll install LS 1 rear brake junk yard swap Already sitting on and plan to weld up axle tubes at that time. Thanks for the input.