classiccarcustoms
04-25-2020, 04:14 PM
I have to much going on right now and Im offering up a 1968 camaro build for sale to serious buyers only. This car would cost well over 120K to get to this point with the parts included and the work already done.
Here is a link to the car as purchased https://www.streetsideclassics.com/vehicles/0393-phx/1968-chevrolet-camaro-ls3-restomod
Another link www.youtube.com/watch?v=jBTEM23Z6Vc&feature=emb_title
Link to build thread: https://lateral-g.net/forums/showthread.php?t=57386
Parts still new in the box is a extremely long list and nothing but the best was purchased for this build.
-DSE Hydro formed front sub frame, complete powder coated and assembled. #032004-S ($8,800) -Installed.
-DSE Quadralink rear suspension. #041703-D, ($3,800) -Installed.
-DSE subframe connectors. #010101 ($215) -Installed.
-DSE Trunk floor corner cut outs for the use of 3 inch exhaust. #040112 ($47.) -Installed.
-DSE Mini tubs. #040401 ($400) -Installed.
-DSE Speed gear FX custom built and narrowed 9 inch ford rear and BIG MONEY! ($5,600) -Installed.
-DSE fuel access door. #080402 ($100) -Installed.
-DSE wiper motor #121301 ($550)
-DSE RS electric headlight door conversion. #122104 ($475) -Installed.
-DSE core support close out panel #011502 ($400)
-DSE engine mount kit #060404 ($325) -Installed.
-DSE body mount kit #010301. ($190) -Installed.
-DSE body mount ARP bolt kit #010801. ($115) -Installed.
-DSE stainless headers #061001 ($2,400) -Installed.
-DSE 1000 series stainless narrowed fuel tank. #080133 ($2,985) -Installed.
-DSE billet pct catch can #060110 ($145)
-DSE steering shaft from Ididit to Die rack and pinion. #092524 ($200)
-DSE rear tow hooks #040305 ($70) -Installed.
-DSE HD leaf spring pocket floor kit #040110 ($425) -Installed.
-Forgeline custom wheels with Michelin tires. Never seen the road, BIG MONEY! ($8,000) -Installed.
-BAER Pro + big brake 6 piston rear brakes #4262152 ($2,500) -Installed.
-BAER Pro + 6 piston front brakes. #4301352 ($2,100) -Installed.
-BAER brake billet master cylinder & proportioning valve. #6801274LP ($400)
-BAER Proportioning valve #60000549 ($125)
-Hot Rod Shop Hydro boost braking kit. ($700)
-American Auto-wire complete body wiring harness #500661 ($630)
-Vintage Air complete top of the line a/c and heating system. #736635-52 ($1,000)
-Vintage Air condensor unit #021190 ($250)
-Vintage Air streamline 3 knob panel #491223 ($210)
-Vintage Air firewall bulkhead mount #389600 ($70)
-Dakota Digital HDX-67C-CAMK ($1,400)
-Dakota Digital obd 11/can interface #bim-01-2 ($125)
-Dakota Digital dash mount dimming kit #dim-1 ($50)
-Corbeau black leather seats with heat. NEW NEVER USED ($1,500)
-Nick Williams billet throttle body for supercharged applications #sd102mmscb ($800) -Installed.
-GM parts performance BRAND NEW NEVER RAN! B15 CRATE ENGINE LSX376 #809-19417356 ($9,200)
-Whipple supercharger 2.9 Powder coated Orange. ($6,500) -Installed.
-Mast 62lb Injectors ($600) -Installed.
-Weaner motorsports drive kit. ($4,500) -Installed.
-Moroso LS oil pan #20142 ($375) -Installed.
-Moroso LS oil pick up tube #24050 ($60) -Installed.
-GM LS oil windage tray #1261129 ($35) -Installed.
-GM LS oil pan gasket #12612350 ($45) -Installed.
-ARP LS header stud kit #434-1301 ($110) -Installed.
-CBT Billet remote coil pack brackets. ($100)
-8 GM coil packs ($250)
-MSD roll of ignition wire ($150)
-MSD LS spark plug wire ends. ($75)
-Zerogravity stage 2 6L80 trans with tap shifter from zerogravityperformace.com ($4,600) Installed.
-TCI flex plate #399756 ($320) Installed.
-Billet LS mini starter ($375) -Installed.
-GM stand alone LS wire harness kit with ECM and all sensors ($1,600)
-Eddie Motor sports Billet hood hinges ($600) -Installed.
-Eddie Motor sport polished billet LED tail lights ($800)
-Eddie Motor sports polished billet marker light bezels. ($150)
-Fesler billet outer door handles Polished ($400)
-Ron Davis custom radiator with dual Seal fans. ($1,600)
-Shop LLC front kick panels covered in black leather. ($600)
-Shop LLC rear package tray, covered in black leather. ($750)
-Front and rear bumper all smoothed and tucked and sent out and chrome plated. ($2,000)
-Bowlers transmission tunnel kit. ($400) -Installed.
-Billet Specialties billet black trunk hinges #BLK875610 ($400) -Installed.
-Alarm with power door lock ($400) -Installed.
-Electric Life power window kit front and rear ($700)
-Electric Life wire harness and switches for power windows ($200)
-CBT billet remote battery hold down ($125) -Installed.
-Optima battery ($300) -Installed.
-Flaming river remote battery cut off switch. ($145)
-American Auto wire remote battery cable kit ($150)
-American Auto wire battery jump terminals ($125)
-Classic 3 point front seat belts. ($350) -Installed
-Ididit black powder coated tilt column ($800) -Installed.
-Budnik billet steering wheel ($400)
-Hooker black heart LS 3" stainless exhaust kit #705013109rhkr ($1,500)
-Classic Chevy R/S front end kit ($1,000)
The body on this car has already been completely restored and painted the only exterior part of the car that will need paint in the brand new cowl hood and R/S front lower valance. This is a super easy build to finish and have one of a kind supercharged DSE equipped 1968 Camaros out there!
Location:San Jose CA
SOLD
I have over 90k in just parts alone (with out tax & shipping) plus most of these big ticket items are 6-10 weeks back ordered. All parts are new.... NOT USED.
The car was bought for 60k before all the new parts.
I have over 350 hours in labor to date. Everything is professional installed and welded all the way around(nothing hides by seam sealer).
There is tons of pictures on the build thread, please take a look and let me know if you need other pictures.
I am trying to finish my bubble top and twin turbo 69 Camaro. I don't think I will get to this car for at least a year.
Might trade for someone to build a pond in front yard, 2nd story home addition.
Here is a link to the car as purchased https://www.streetsideclassics.com/vehicles/0393-phx/1968-chevrolet-camaro-ls3-restomod
Another link www.youtube.com/watch?v=jBTEM23Z6Vc&feature=emb_title
Link to build thread: https://lateral-g.net/forums/showthread.php?t=57386
Parts still new in the box is a extremely long list and nothing but the best was purchased for this build.
-DSE Hydro formed front sub frame, complete powder coated and assembled. #032004-S ($8,800) -Installed.
-DSE Quadralink rear suspension. #041703-D, ($3,800) -Installed.
-DSE subframe connectors. #010101 ($215) -Installed.
-DSE Trunk floor corner cut outs for the use of 3 inch exhaust. #040112 ($47.) -Installed.
-DSE Mini tubs. #040401 ($400) -Installed.
-DSE Speed gear FX custom built and narrowed 9 inch ford rear and BIG MONEY! ($5,600) -Installed.
-DSE fuel access door. #080402 ($100) -Installed.
-DSE wiper motor #121301 ($550)
-DSE RS electric headlight door conversion. #122104 ($475) -Installed.
-DSE core support close out panel #011502 ($400)
-DSE engine mount kit #060404 ($325) -Installed.
-DSE body mount kit #010301. ($190) -Installed.
-DSE body mount ARP bolt kit #010801. ($115) -Installed.
-DSE stainless headers #061001 ($2,400) -Installed.
-DSE 1000 series stainless narrowed fuel tank. #080133 ($2,985) -Installed.
-DSE billet pct catch can #060110 ($145)
-DSE steering shaft from Ididit to Die rack and pinion. #092524 ($200)
-DSE rear tow hooks #040305 ($70) -Installed.
-DSE HD leaf spring pocket floor kit #040110 ($425) -Installed.
-Forgeline custom wheels with Michelin tires. Never seen the road, BIG MONEY! ($8,000) -Installed.
-BAER Pro + big brake 6 piston rear brakes #4262152 ($2,500) -Installed.
-BAER Pro + 6 piston front brakes. #4301352 ($2,100) -Installed.
-BAER brake billet master cylinder & proportioning valve. #6801274LP ($400)
-BAER Proportioning valve #60000549 ($125)
-Hot Rod Shop Hydro boost braking kit. ($700)
-American Auto-wire complete body wiring harness #500661 ($630)
-Vintage Air complete top of the line a/c and heating system. #736635-52 ($1,000)
-Vintage Air condensor unit #021190 ($250)
-Vintage Air streamline 3 knob panel #491223 ($210)
-Vintage Air firewall bulkhead mount #389600 ($70)
-Dakota Digital HDX-67C-CAMK ($1,400)
-Dakota Digital obd 11/can interface #bim-01-2 ($125)
-Dakota Digital dash mount dimming kit #dim-1 ($50)
-Corbeau black leather seats with heat. NEW NEVER USED ($1,500)
-Nick Williams billet throttle body for supercharged applications #sd102mmscb ($800) -Installed.
-GM parts performance BRAND NEW NEVER RAN! B15 CRATE ENGINE LSX376 #809-19417356 ($9,200)
-Whipple supercharger 2.9 Powder coated Orange. ($6,500) -Installed.
-Mast 62lb Injectors ($600) -Installed.
-Weaner motorsports drive kit. ($4,500) -Installed.
-Moroso LS oil pan #20142 ($375) -Installed.
-Moroso LS oil pick up tube #24050 ($60) -Installed.
-GM LS oil windage tray #1261129 ($35) -Installed.
-GM LS oil pan gasket #12612350 ($45) -Installed.
-ARP LS header stud kit #434-1301 ($110) -Installed.
-CBT Billet remote coil pack brackets. ($100)
-8 GM coil packs ($250)
-MSD roll of ignition wire ($150)
-MSD LS spark plug wire ends. ($75)
-Zerogravity stage 2 6L80 trans with tap shifter from zerogravityperformace.com ($4,600) Installed.
-TCI flex plate #399756 ($320) Installed.
-Billet LS mini starter ($375) -Installed.
-GM stand alone LS wire harness kit with ECM and all sensors ($1,600)
-Eddie Motor sports Billet hood hinges ($600) -Installed.
-Eddie Motor sport polished billet LED tail lights ($800)
-Eddie Motor sports polished billet marker light bezels. ($150)
-Fesler billet outer door handles Polished ($400)
-Ron Davis custom radiator with dual Seal fans. ($1,600)
-Shop LLC front kick panels covered in black leather. ($600)
-Shop LLC rear package tray, covered in black leather. ($750)
-Front and rear bumper all smoothed and tucked and sent out and chrome plated. ($2,000)
-Bowlers transmission tunnel kit. ($400) -Installed.
-Billet Specialties billet black trunk hinges #BLK875610 ($400) -Installed.
-Alarm with power door lock ($400) -Installed.
-Electric Life power window kit front and rear ($700)
-Electric Life wire harness and switches for power windows ($200)
-CBT billet remote battery hold down ($125) -Installed.
-Optima battery ($300) -Installed.
-Flaming river remote battery cut off switch. ($145)
-American Auto wire remote battery cable kit ($150)
-American Auto wire battery jump terminals ($125)
-Classic 3 point front seat belts. ($350) -Installed
-Ididit black powder coated tilt column ($800) -Installed.
-Budnik billet steering wheel ($400)
-Hooker black heart LS 3" stainless exhaust kit #705013109rhkr ($1,500)
-Classic Chevy R/S front end kit ($1,000)
The body on this car has already been completely restored and painted the only exterior part of the car that will need paint in the brand new cowl hood and R/S front lower valance. This is a super easy build to finish and have one of a kind supercharged DSE equipped 1968 Camaros out there!
Location:San Jose CA
SOLD
I have over 90k in just parts alone (with out tax & shipping) plus most of these big ticket items are 6-10 weeks back ordered. All parts are new.... NOT USED.
The car was bought for 60k before all the new parts.
I have over 350 hours in labor to date. Everything is professional installed and welded all the way around(nothing hides by seam sealer).
There is tons of pictures on the build thread, please take a look and let me know if you need other pictures.
I am trying to finish my bubble top and twin turbo 69 Camaro. I don't think I will get to this car for at least a year.
Might trade for someone to build a pond in front yard, 2nd story home addition.