PDA

View Full Version : 64-70 Mustang Total Control manual rack



Cop Magnet
03-31-2020, 08:19 PM
SOLD! Thanks, Scott.

P/N TCP RCKM-02
This has been installed and has a few hundred miles. This is a picture from this week. Includes all hardware including tie rod ends, steering shafts and U-joints. I have the original installation instructions and there’s a nice video on YouTube. There is some cosmetic damage on the end of the drivers side of the body of the rack from improper clearance set up. Selling as I’m going with power steering.
Will ship or you can see near Chicago.
Originally $1685. Asking $700.

174325

kc chief
04-04-2020, 08:43 PM
I have a 1965 Mustang and I'm very interested. I live in Kansas City, so we'd have to figure out shipping. Do you know how much this weighs? Thanks!

Cop Magnet
04-05-2020, 11:02 AM
I can get it packed up in the Flaming River box that just arrived and find out. Do you want the whole steering column with the adapter installed, or take it off and you install on your own column? My new kit came with a full column, so you can have it.
Give me a day or two. Thanks!

kc chief
04-05-2020, 01:24 PM
Thanks for the response. Since you've done the install, what would you recommend? I have a nice rebuilt stock column, so my first thought was to have you take off the adapter. Do you have an opinion and why? Thanks!

Cop Magnet
04-05-2020, 07:50 PM
Actually, it came with the car. I have looked over the instructions because I’ll be pulling it tomorrow and it doesn’t look too bad. There’s an adapting cap that goes on the bottom of the steering column. You’ll need to fit it and drill two holes to secure it. Otherwise, no need to use the whole column.