The LS1 Table

[Camaro Zach]

so i have been wanting to do this for a long time and finally came across a local guy on LS1 Tech that threw a rod in his 2000ss pulling wheelies at the track. So i got the shortblock and started cleaning. The glass is a little dirty since its been sitting for so long. Let me know what you think.
Pic 1 (http://www.blazinlow.com/forum/attachment.php?s=&postid=557147)
Pic 2 (http://www.blazinlow.com/forum/attachment.php?s=&postid=558441)
Pic 3 (http://www.blazinlow.com/forum/attachment.php?s=&postid=558442)
Pic 4 (http://www.blazinlow.com/forum/attachment.php?s=&postid=558443)

[Ralph LoGrasso]

Looks awesome, Zach!

[DeepBlue68]

Oh that is awesome!!! That is a great idea for a table in the garage. Nice work!

[trapin]

Looks great. But I would round off the corners with 5" radius.

[Camaro Zach]

Thanks guys, yea the glass is a bit long too i might get it cut and bevled and radiused. Its 3/4" thick !

[toxicz28]

Sweet table! I had considered doing one with aluminum wheels. Haven't gotten around to it yet though.

[toxicz28]

Another idea. If you still have the cam and crank, Weld them together for a mailbox post. I've seen that done before.

[Camaro Zach]

thanks for the idea but i dont think my mom would approve of that haha. I think im going to use the crank for the stand of an endtable with another small glass top. I dont have the cam from this motor but used another to build this lamp.
Clock (http://www.blazinlow.com/forum/attachment.php?s=&postid=470763)
Lamp 1 (http://www.blazinlow.com/forum/attachment.php?s=&postid=470766)
Lamp 2 (http://www.blazinlow.com/forum/attachment.php?s=&postid=470771)

[Bill Howell]

:kewlpics: Zach, I like the table the best.

[J-Rod]

so i have been wanting to do this for a long time and finally came across a local guy on LS1 Tech that threw a rod in his 2000ss pulling wheelies at the track. So i got the shortblock and started cleaning. The glass is a little dirty since its been sitting for so long. Let me know what you think.


That's so awesome, I've been wanting to build that table for a while too. Are you gonna polish the block and put wine bottles in the cylinders like the other guy did? That same guy also did a polished block up on end for an end table. With wine in all 8 cylinders, it looked pretty cool.

Good job!

[Camaro Zach]

I'm not sure if ill polish it. As of right now i wont be because sooner or later im going to use it for mockup in my car and it will just get trashed.
Thanks

[Moose]

Is the crank good??


I could use that. :):)

[Camaro Zach]

Is the crank good??


I could use that. :):)
nope sorry it is quite fubared up