Pay it Forward-Freebies

[LTorres]

Guys,
I seen this on another forum and thought we could make good use of it here. What the heck...it is Christmas and all. Basically you offer up any Pro-Touring related car parts and the first one to respond in this thread gets it (usually the person getting the freebie arranges for pick or delivery)!!

So let me be the first, to offer up a free set of pads (if I have them in stock) to the first person that responds. If I do not have the pads I will make good on some other goodie here at PBC!

C'mon clean out that garage of yours!!! The wife may even thank you later!!

[formula]

hey i totally need a set of pads!! stock front disc brakes for a 78 bird?

I have no parts whatsoever that are worth anything to anybody, though...:crying: unless you want a totally destroyed old quadrajet...or if you guys can think of anything else that somebody that has done intake, exhaust, carb, !egr, tranny, clutch, and driveshaft mods might have, feel free to ask me!

[Steve Chryssos]

Good idea Laramie.

Okay:
I have a nice early 70's 350 2 bolt block (1971?) here for the taking. Crank, rods, pistons are still installed, but the short spent one winter outside so it is very rusty. Take it apart, freshen the block and merry Xmas. No, I will not go to the trouble of shipping it to you. If you want it, come and get it. If not, it will continue to sit in my garage where it has been for four years.

[LTorres]

hey i totally need a set of pads!! stock front disc brakes for a 78 bird?

I have no parts whatsoever that are worth anything to anybody, though...:crying: unless you want a totally destroyed old quadrajet...

Call me up! I am here for another hour tonight! 1 866 992 7253 lets see what we have for you!

[formula]

Just so you guys know, LTorres just hooked me up with a set of Porterfield R4S compound pads for my car...which are like 80 buck pads, just for the front.

CAN YOU SAY FREAKIN AWESOME?!?!

Cause I can. You totally made my week, dude! Thanks!

[OLDFLM]

Stock cast Pontiac 4X heads with good valve job, Crane Springs, screw-in studs, 1.5 rockers... in Omaha... come get 'em or pay shipping and they're yours... ready to bolt on and go!

V/R,
Ty

[vanzuuk1]

O.K. if anyone is a mopar guy into car models, I have a 1/25 scale johan plymouth roadrunner model still in plastic wrap. Its no longer available at hobby shops but I will never build it so just pay the shipping and its yours. Should be about five bucks to ship.

[astroracer]

O.K. if anyone is a mopar guy into car models, I have a 1/25 scale johan plymouth roadrunner model still in plastic wrap. Its no longer available at hobby shops but I will never build it so just pay the shipping and its yours. Should be about five bucks to ship.

Okay, being that no one is snapping this up I will. Do you use PayPal?
Mark

[vanzuuk1]

Just email your address to [email protected].

[BB69]

I have a full car set of drums (with some backing plates) from my 69. I know they aren't PT per say, but maybe someone needs them for a restoration. They are rusty, but free to anyone that wants to pick up or have shipped. I also have a front sway bar from the 69, stock, that can be had as well.

Ken

[crazyfireman]

I have a new in package dome light lens for a 67-69 camaro, pay shipping and merry christmas!

[Steve68]

I'll take the dome light, PM me

[Steve68]

My turn, Chrome BBC valve covers, with T-bars, There not real tall, chromes nice, would look good on a driver, not a show car, pay the shipping, Merry Christmas!!!!

[crazyfireman]

Dome light is spoken for!

[YoungGun]

I got a pretty much brand new 69' Camaro Silver Grill...shipping and its yours.

Tim

[Little Bob]

I have a brand new fan shroud for a 69 GTO. Pay shipping or pickup and it's Yours. Merry Christmas

[homerneedspeed]

i have a edelbrock 600cfm elec choke carb i just pulled off of my car that i could part with if anyone wants to pick it up in north texas

[derekf]

I've got a bench seat for 68-72 A-bodies (believe it's from a 68 Chevelle). It's tan. It needs a new cover or some duct tape. You'd have to pick it up - shipping would be unpleasant.

I've also got an AC compressor and a carburetor from some manner of Ford. I can't be more specific as they were left behind by the previous owner of my house, but I might remember to get pics if anyone cares.

[Chevy350]

Now this is a nice thread :) Too bad I live in Europe though...

It's a funny coincidence that I earlier this morning gave away 3 stock Volvo 960 aluminum rims to a guy on a norwegian car-forum. He has the same kind on his Volvo, and had managed to run one of his rims into a curb. It's nice to help someone with something I considered to be scrap metal.

Merry christmas everyone!

[crazyfireman]

I sure could use the grille young gun!

[myclone]

I'll throw something in the pile that may help someone out...

1989 350 two bolt 4.00 bore bare block out of a 1500 2wd truck. Factory roller cam bosses are there/drilled and it will possibly need to go .010 over on the cylinders to clean them up (I havent mic'ed it but it looks/feels like minimal bore wear). The bad part is #1 main bearing spun so a line bore will need to be performed to repair.

Its been stored inside my garage so there is minimal/no rust to deal with and IMO would make a decent foundation for a build that will use off the shelf roller cam stuff. Its in my way really but not enough to throw it away so if someone wants it come get it. Due to weight/cost/time constraints I cant ship it.

If someone really wants the stock heads from that same motor I'll throw them in the deal too. Extremely minor bowl work/clean up done and they performed flawless for ~10k miles until an exh valve burned. Theyll need a valve job and valve seals but the guides have minimal wear since the motor only had 87k miles on it to begin with and no cracks or other issues. Great heads for a truck or daily driver IMO since youd spend tons of money with a head porter to get them to flow even close to what unported after market heads would. Ive hung onto them as spares for my trucks but since I have two more sets these can go to someone that could possilby use them.

[Nicks67GTO]

i have a edelbrock 600cfm elec choke carb i just pulled off of my car that i could part with if anyone wants to pick it up in north texas


Hey if you still have that i need it, PM me if you want to part ways with it.

[vanzuuk1]

Young gun , if crazyfireman does not taake the grill I will, mine is cracked.

[vanzuuk1]

Astroracer, I sent the model today.

[Zefhix]

really...really cool thread!
I have a BB chevy Performer 2-0 oval intake in near perfect condition. email me keith at zefhix dot com. Merry Christmas you guys....I'm glad this year is finally almost over.

[harshman]

hey keith....how 'bout a bumper for a 68 camaro? :moon:

[Rick Dorion]

I have a pair of small block chevy valve cover spacers - about 1" high for the cost of shipping.

[Zefhix]

hey keith....how 'bout a bumper for a 68 camaro? :moon:

I got one sitting here collecting dust if you want it! :)

[4OfaKind]

I have a rebuildable 700r4 from a Chevy S10. I plan to get a 4L80e so I will let this go if anyone wants it. I live in Vegas.

Merry Christmas



Mal

[jacobgiles]

factory AC setup to anyone who needs it

[68BNUT]

Ive got a 2 speed powerglide sitting in my garage with drive shaft and crossmember, to lazy to ship Somebody come pick it up. Im in the Dallas Fort worth area.

I could use a radio faceplate for a 68 camaro. :poke:

[astroracer]

Astroracer, I sent the model today.
Thanks bud, I got it... You spent some coin on the shipping... I will gladly cover it if you want me too. :bananna2:
Mark

[vanzuuk1]

Mark I am glad you got it, it was sitting on a shelf for ten years collecting dust. I only build the 1/12 stuff now. If you ever do any 1/12 parts for models let me know.