chuckd71
07-05-2019, 11:25 AM
Pair of alignment tools, 3D printed in PLA, these are the parts highlighted in blue. If you are doing a cam swap in an Gen V motor you need these to note where your oil pump was lined up so you don't end up with low oil pressure after you reinstall it. Similar to Kent Moore EN-51267.
I don't know why these are so necessary in these motors as I never had an issue when doing LS cam swaps, but apparently they are and personally I opted to spend the money to have these made, thinking better safe than sorry. I had a few extra made to sell to break even.
LT1 LT4 L83 L86 oil pump alignment tool Gen V Camaro Corvette 5.3 6.2 cam swap.
I don't have the pics moved from my phone to laptop yet but here is the ebay listing which has some https://www.ebay.com/itm/283538772365
I don't know why these are so necessary in these motors as I never had an issue when doing LS cam swaps, but apparently they are and personally I opted to spend the money to have these made, thinking better safe than sorry. I had a few extra made to sell to break even.
LT1 LT4 L83 L86 oil pump alignment tool Gen V Camaro Corvette 5.3 6.2 cam swap.
I don't have the pics moved from my phone to laptop yet but here is the ebay listing which has some https://www.ebay.com/itm/283538772365