PDA

View Full Version : 2011 CTS-V Recaro seats in a 1967 Camaro?



Senek67RS
03-18-2019, 06:45 PM
Curious if anyone has put these in their first gen? If so, were there any firment issues?

Senek67RS
03-19-2019, 05:40 PM
51 views and not a single comment? Lol tough crowd...

spacepirate
03-19-2019, 08:30 PM
Do you have a picture you could post?

dhutton
03-20-2019, 04:56 AM
I used Recaro seats from a 2014 Z28. I am guessing they are similar to the CTS-V seats. The fit was very tight with my MCI console. Would have been a lot easier if I had not used a console. The seats are also very tall so expect some effort there. I have a TMI headliner which gains an inch. To be honest I would not do it again.

I have not seen anyone use the CTS-V Recaro seats.

Don

Senek67RS
03-20-2019, 06:03 AM
I used Recaro seats from a 2014 Z28. I am guessing they are similar to the CTS-V seats. The fit was very tight with my MCI console. Would have been a lot easier if I had not used a console. The seats are also very tall so expect some effort there. I have a TMI headliner which gains an inch. To be honest I would not do it again.

I have not seen anyone use the CTS-V Recaro seats.

Don


Thanks for the insight. I am using the 1 piece liner from TMI, too.

Dannnn
03-20-2019, 08:21 PM
To be honest I would not do it again.


What wouldn’t you do again, the seats or the headliner?

dhutton
03-21-2019, 03:55 AM
What wouldn’t you do again, the seats or the headliner?

The seats. Just a little too tall and wide. Very comfortable though.

Don