LSA, what do I do for vacumn for brake booster, help

[qnitro]

Im doing my first LSA swap, and Im running a DSE/Baer remaster, and usually run a traditional intake, and since Im running a LSA, what do I do for vacumn, should I drill a hole in the upper blower lid, and tap in??

Kevin

[DKz Garage]

Im doing my first LSA swap, and Im running a DSE/Baer remaster, and usually run a traditional intake, and since Im running a LSA, what do I do for vacumn, should I drill a hole in the upper blower lid, and tap in??

Kevin

I believe you use the large port on the front (top side) of the blower snout......

[qnitro]

Hmmmmm I thought that's where the catch can went... I have a CTSV, I will look and report back :)

[parsonsj]

Yes -- there's a port specifically designed for connection to a brake booster.

[nicks67camaro]

Like John said the big port on the snout is designed for the brake booster. I used this vacuum hose that routes pretty well to the DSE booster.

https://www.amazon.com/gp/product/B007QBJXQ8/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

[qnitro]

Like John said the big port on the snout is designed for the brake booster. I used this vacuum hose that routes pretty well to the DSE booster.

https://www.amazon.com/gp/product/B007QBJXQ8/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Im ordering this..

[nicks67camaro]

Hmmmmm I thought that's where the catch can went... I have a CTSV, I will look and report back :)

Watch this video on the catch can this is how i installed mine.

https://www.youtube.com/watch?v=DvST-U0iSOM&t=432s

[qnitro]

Watch this video on the catch can this is how i installed mine.

https://www.youtube.com/watch?v=DvST-U0iSOM&t=432s

Thanks!