**SOLD** AFX Spindles & C5 Brake Kit

[trapin]

Hi folks. I am offering up my AFX Spindles and Touring Classics C5 Brake Kit (13” rotors) today. They are a little dirty with a bit of surface rust from spending the past 10 years in my garage but neither the Spindles nor the Brakes have ever seen the road. How did that happen? Years ago when I bought my wheels I did not order enough back spacing to clear the calipers, something we just found out recently when my car was down at V8 Speed Shop getting some work done. Since new wheels were going to be too expensive we decided to put on stock spindles and a different brake kit to get the car driving. My car has been in various stages of restoration for the past 17 years and has mostly just sat in the garage until now. I am bummed about losing out on having these on my car but letting them sit in my garage collecting dust would be a waste, so I’d like to see them go to a new home.

Kore3 sells a similar C5 Brake Kit for the AFX Spindles for $582. AFX Spindles through Speedtech are $1300. With taxes and shipping it’s over $2000 for this setup. I am offering both my AFX Spindles and C5 Brake Kit for $1200. That is an $800 savings for anyone looking to save some money on their Pro-Touring project this Holiday Season. My loss - your gain.

They are not damaged, they have never been driven on….you have my word. I am a Moderator here and have been a member for 17 years. Larry and the other Moderators can vouch for me.

All hardware is there including brake pads. The price is firm, no bargaining or trades please. Buyer responsible for all shipping costs. First text message wins the prize. (586)872-0135.

Thank you folks.

158276 158277 158278 158279 158280 158281 158282 158283

[GaRys69]

Are those tall or std?

[trapin]

They must be standard because when we swapped them out for the stock spindles there was little change in the ride height.

[dhutton]

They must be standard because when we swapped them out for the stock spindles there was little change in the ride height.

I think you are confusing tall spindles with drop spindles. Both versions have 3/4” drop if I remember right.

Don

[chevelletiger]

Would you sell just the spindles?
I have the vette calipers already

[KAN KAN Speedshop]

I would take the calipers rotors and hardware if it come with brackets

[trapin]

Chevelletiger.....yes. It looks like Kan Kan is going to take the brake kit so I can sell you the spindles for $850. If that works for you throw me your phone # and I'll call you tomorrow morning. Thanks.

[nicks67camaro]

if the calipers fall through i would be interested in just the calipers

[trapin]

All items sold. Thank you.