PDA

View Full Version : Bendpak lift



KnightmareZ
11-05-2018, 07:59 PM
Building an extra bay for the lift.

- - - Updated - - -

Bendpak 10AS delivered

- - - Updated - - -

Extra depth concrete to approximately 18-20" in depth. Rebar and wire was also used here

- - - Updated - - -

Slab poured

KnightmareZ
11-05-2018, 08:04 PM
Used 10" 304 stainless dowels epoxied in, instead of the 4" that came with the lift. We also braced it off at the top to the trusses in the ceiling.

- - - Updated - - -

Setting it all up

KnightmareZ
11-05-2018, 08:06 PM
Almost done

KnightmareZ
11-05-2018, 08:16 PM
158117

- - - Updated - - -

This lift is probably one of the best investments I've ever made. FWIW

dhutton
11-06-2018, 05:46 AM
That is a great workspace.

Don

KnightmareZ
11-06-2018, 05:58 AM
Thanks Don, I should have done this 15 years ago. We just installed an HVAC unit to heat and cool both sides about a month ago. So no more space heaters and window units. LOL

Motown 454
04-02-2021, 07:10 PM
Very Nice!

shelteredchevelle
04-03-2021, 12:23 PM
I have the same lift, makes everything so much easier.

TANKMASTERJ
04-25-2021, 05:52 PM
I just ordered the Challenger CL10V3 I believe is the correct #. Usa made. It's kinda asymmetrical and symmetrical technology.

TANKMASTERJ
06-02-2021, 11:04 PM
My new Challenger CL10V3.
Just got to wire it up.
Man I'm glad my car is parked in it LOL189410189411189412189412189413

Steve68
06-08-2021, 02:48 AM
Where did you get the lift from?

Interested in getting one here shortly, thanks

Either a Bend pak or a Challenger,

TANKMASTERJ
07-27-2021, 06:36 PM
Where did you get the lift from?

Interested in getting one here shortly, thanks

Either a Bend pak or a Challenger,

I bought my challenger through NAPA. It arrived and the pump was bad. Called napa and a rep was at my shop that night. Next morning challenger rep called, we discussed and they overnighted the new pump. I had it the next day. It was about 4800.00. could have got the same lift online about 4450.00 but I seriously doubt the service would have been as good.
The challenger is built very heavy compared to some friends lifts, be it rotary, eagle, and bemdpak. I'm exceptionally pleased.
Jason