Cutting stock rotors into Hubs in Canada

[Yukon Cornelius]

Just wanted to offer my services, especially to Canadians because of the price of the American dollar. I can cut stock rotors down into hubs for those of you that need them to do a Big Brake Upgrade. I get a pretty good deal at a parts house and can pass that on to you. Also shipping will be cheaper and there will be no duties and double import charges by FedEx, UPS etc.

Let me know if I can help you out.

Here's a set I turned down for my thirdgen.

157919 157920

[ryeguy2006a]

How much to do the machining?

[Big Dawg]

Where are you located?

[Yukon Cornelius]

Sorry guys, didn't get notification of your posts.

I'm in Windsor Ontario.

I'd have to quote individually on the machining based on the price I can get the rotors for.

[Yukon Cornelius]

Bump if anybody in Canada needs this.

[badazz81z28]

How much to do the machining?



Does it really save you money? You still need to buy the other parts?


http://www.customworksproducts.com/brakes.html

[astroracer]

I got a used set from a junkyard for 10 bucks. Cut the rotors off with a sawzall and had the hubs turned down to fit in C4 Corvette rotors. New bearings and races and I was into the package for about 80 dollars...
https://static1.pt-content.com/images/pt/2019/06/2v2ES3ckGx9EDKg-1.jpg
Far cheaper then 300 or so for custom hats... that do the same thing. :)
With the rotor on you would never know I "cheaped out". :)
https://static1.pt-content.com/images/pt/2019/12/2v2ES3fhFx9EDKg-1.jpg
Mark