67-69 Camaro subframe, DSE control arms, DSE 12:1 steering box, KOOKS, etc - Pit. PA

[VTtransam]

I've decided to take my car up a notch this winter with a Speedtech Extreme front subframe. All parts listed below have 1200 miles on them, the DSE Turn-One 12:1 ratio box has 5 miles max on it right now. Located near Pittsburgh, PA. Might be able to ship in the same crate my Speedtech frame came in, would probably cost $500 or so via UPS freight. Would definitely prefer local pick up.

Everything is fully assembled and in the car right now, hope to have it out within a few weeks.

Stock subframe, blasted and painted gunmetal metallic grey: Currently in car, will get good pictures for those interested
Detroit Speed - Speed kit 3, with QA1 socks and springs ($3600 new or so): https://www.detroitspeed.com/all-products-front-suspension/speed-kit-3-front-suspension-kit-1967-69-camaro-firebird-1968-74-nova-031352-group
Dirty Dingo billet LS adapter mounts ($70 new) : https://www.dirtydingo.com/shop/index.php?cPath=359_363
Kooks long tube '69 F-Body headers, Jet hot coated Titanium color in their 2500 degree coating, O2 bungs installed ($1100 + $400 for the coating): https://www.kooksheaders.com/race/lsx-swap/1967-1969-f-body-camaro-firebird-1968-1974-x-body-nova-ventura-omega-1-7-8-x-3-lsx-swap-header.html
CPP spindles with Corvette C5 hubs ($380) : http://www.classicperform.com/C5-Spindles/C5-Spindles.htm

Brakes not included! I plan to re-use most of my Wilwood kit hopefully.

$4,250 for everything listed above. That's basically $1300 off the aftermarket parts and you are getting the subframe for free. Everything is like-new, never tracked, local cruising only.

[70ptta]

If you’ll separate the items I’m interested in the steering box Let me know how much shipped. Thanks.

[souljaboy9768]

Can you PM me or post pics of subframe. Any pics of suspension on your car... what did you run for rear suspension

[VTtransam]

Can you PM me or post pics of subframe. Any pics of suspension on your car... what did you run for rear suspension

I'm running Ridetech 4-link in the rear. Will take some pictures tomorrow an post them up.

I'll separate the easy items to ship:

DSE 12:1 Steering box: $750 shipped
Headers: $800 shipped
Dirty Dingo LS adapters: $45 shipped

[souljaboy9768]

I’m interested in dse front clip shipped to 77904, text me 36one648759five

[csouth]

I’m interested in dse front clip shipped to 77904, text me 36one648759five

I think you might have misread that. Its a stock front clip with DSE parts...

[souljaboy9768]

I understand, I’m interested in the front clip, with Dse parts

[VTtransam]

Subframe is out of the car. Pictures below.

Willing to separate items:

DSE/Turn One Steering Box - bought new in May 2018, has maybe 15 miles on it - $750 shipped
KOOKS headers with Jet-Hot 2500 degree Coating in Titanium color - $800 shipped - coating is new
DSE upper and lower control arms - $1000 shipped (These are $1400 on DSE website)
Dirty Dingo LS motor mount adapters - $45 shipped
Energy Suspension Poly motor mounts - $60 shipped (new)
Speedtech Engine frame stands - $40 shipped
QA1 Adjustable coil overs - $300 shipped
CPP spindles with Corvette C5 hubs - $300 shipped - Corvette C5 brake kits will bolt right up.

Subframe, steering linkages, and Sway bar - $1000 - picked up - or ship at buyers expense.

[KAN KAN Speedshop]

PM Sent. I want the Dirty Dingo LS Adapters please

[Impala67]

PM sent on the box.

I will take it.

[stevenb8]

Do you have part number of the spindles? I'd like to know if the tall spindle or std.

[VTtransam]

Steering Box and Dirty Dingo adapters have been sold. All PM's replied to.

[VTtransam]

Do you have part number of the spindles? I'd like to know if the tall spindle or std.

Tall Spindle - CPP part #CP30013 - http://www.classicperform.com/C5-Spindles/C5-Spindles.htm

[VTtransam]

Poly mounts and engine stands are sold. Steering box sold as well.

[srcduece]

do you still have upper and lower control arms

[VTtransam]

do you still have upper and lower control arms

Yes, control arms are still available.

[srcduece]

pm sent

[Camarowarrior71]

How much for the subframe minus the spindles?

[thor70]

Are the upper and lower control arms still available? Also what is the spring rate of the QA's if they are still available also.

[VTtransam]

Are the upper and lower control arms still available? Also what is the spring rate of the QA's if they are still available also.

Yes control arms and coil overs are still available. 400# spring rate I believe (LS motor)

[VTtransam]

Photos of the header clearence in the car per request:

[VTtransam]

How much for the subframe minus the spindles?

Shoot me an offer over Private Message. I'm not sure if you just want the subframe itself? Or other items too.

[VTtransam]

Items still available with updated prices:

KOOKS headers with Jet-Hot 2500 degree Coating in Titanium color - $750 shipped - coating is new
DSE upper and lower control arms - $950 shipped (These are $1400+shipping on DSE website)
QA1 Adjustable coil overs - $300 shipped
CPP spindles with Corvette C5 hubs - $300 shipped - Corvette C5 brake kits will bolt right up.

Subframe, steering linkages, and Sway bar - $1000 - picked up - or ship at buyers expense.

[Smooth67]

PM sent!

[Zl1427]

Kooks Headers. These are for an LS engine, yes ?

[Zl1427]

PM sent

[VTtransam]

Kooks Headers. These are for an LS engine, yes ?

Yup, headers are for an LS.

[Zl1427]

Yup, headers are for an LS.

Replied to your PM. Let's make a deal.

[VTtransam]

Headers are sold.

Local sale pending on the subframe and suspension.

[Just 1 More]

PM sent on the coilovers

[VTtransam]

Everything has been sold. Thank you PT.

[Projus]

Is the subframe still available