KillaWatts
05-13-2018, 08:20 AM
Greetings,
I've been over at Camaros.net for a while but figured I'd check out the Pro-Touring scene since that's the build I'm going with.
I've been gathering as much information and insight I can from the forums and other members. My goal is to be able to drive it late summer/fall of this year. I utilize the military base hobby shops and my garage for as much of the work as possible to save money and it's a blast! I'm sure I'll have plenty of questions to get it ready.
Original Specs:
Codes show the car was Butternut Yellow with a black vinyl top, V8. I purchased in Colorado Springs back in 2013. It was someone's project and needed quite a bit of work. It's getting a new top, new quarter panels, hood, and more. It's currently at the body shop finishing up the quarters and getting a DSE mini-tub kit installed.
https://static1.pt-content.com/images/pt/2018/05/y4m_GfOdWKbCwWCwD8z568Y_rHEYi30czZuQTait-1.jpg
My Build/Plan:
LS3 408 Stroker
APT T56 Magnum transmission (2.66)Science Friction Street Slayer Stage II Clutch
Moser 12 bolt w/ Wavetrac 3.73 ratio
RideTech Stage II Coilover Kit with TruTurn kit
Wilwood 140-12272D Front and 140-9219D Rear
305/255 Tires
18x12, 18x9.5 Forgeline Wheels
I've been over at Camaros.net for a while but figured I'd check out the Pro-Touring scene since that's the build I'm going with.
I've been gathering as much information and insight I can from the forums and other members. My goal is to be able to drive it late summer/fall of this year. I utilize the military base hobby shops and my garage for as much of the work as possible to save money and it's a blast! I'm sure I'll have plenty of questions to get it ready.
Original Specs:
Codes show the car was Butternut Yellow with a black vinyl top, V8. I purchased in Colorado Springs back in 2013. It was someone's project and needed quite a bit of work. It's getting a new top, new quarter panels, hood, and more. It's currently at the body shop finishing up the quarters and getting a DSE mini-tub kit installed.
https://static1.pt-content.com/images/pt/2018/05/y4m_GfOdWKbCwWCwD8z568Y_rHEYi30czZuQTait-1.jpg
My Build/Plan:
LS3 408 Stroker
APT T56 Magnum transmission (2.66)Science Friction Street Slayer Stage II Clutch
Moser 12 bolt w/ Wavetrac 3.73 ratio
RideTech Stage II Coilover Kit with TruTurn kit
Wilwood 140-12272D Front and 140-9219D Rear
305/255 Tires
18x12, 18x9.5 Forgeline Wheels