PDA

View Full Version : 67 Camaro Project parts take offs etc


Dons67
04-27-2018, 01:12 PM
Finishing up a few upgrades to my 67 Camaro and have some take-off parts I no longer need - I try and list fair prices but I’m open to reasonable offers on all


SpeedHut Fuel Pressure gauge 15psi - SOLD
SpeedHut Boost gauge 10psi - SOLD
1967 Camaro lower control arms with newer bushings - $30
Holley High-Performance Electric Fuel Pump - SOLD
1967 Camaro Factory gangue cluster 120 speedo / fuel combo in good shape - $40
1967 Camaro Delux interior A pillar chrome trim pieces - SOLD
SONY 600W Xplode 4/3 amp - $50
Aluminum radiator NO LEAKS - $40
Saginaw Steering Box, worked great but developed a leak, great unit to reseal - $100
SBC Oil pan with high volume oil pump & pick up, Like new (4,000 miles) - $50 for both
Headman Headers, SBC in great shape no winter driving - $50
DSE 2” lowering springs 550# part #031115 - no longer available

Items located in Rochester NY area, can ship some stuff and some is too big and would cost almost as much as the part is worth to ship. Shipping is at your cost.

It’s a pain to post pics but i have them all on my cell and can txt or email if you PM me


Thank you,
Don
cp87
04-27-2018, 03:08 PM
pm sent
Dons67
04-27-2018, 04:57 PM
pm sent

Txt sent
importkiller69ss
04-29-2018, 03:58 PM
Interested in aluminum radiator do you know the brand or how many rows

- - - Updated - - -

And also headers
Dons67
04-29-2018, 05:24 PM
Interested in aluminum radiator do you know the brand or how many rows

- - - Updated - - -

And also headers

It was used when i got it from another member - i sent you a pick - hope it helps
ryeguy2006a
04-30-2018, 05:55 PM
Ever get down in the Binghamton or Ithaca NY area? Would be interested in those springs if so.
Dons67
05-01-2018, 06:10 PM
Ever get down in the Binghamton or Ithaca NY area? Would be interested in those springs if so.

How soon do you need them?
ryeguy2006a
05-02-2018, 10:01 AM
Pm'ed you.
Dons67
05-08-2018, 08:23 PM
Updated with revised prices on what is left
DarkoNova
05-10-2018, 01:48 PM
Do you have more info on the headers? Full length? Primary diameter? Straight or angle plug fitment, etc.

Thanks.
Dons67
05-10-2018, 02:13 PM
Do you have more info on the headers? Full length? Primary diameter? Straight or angle plug fitment, etc.

Thanks.


Here is the link where i ordered them - nothing special, just your run of the mill hooker

https://www.summitracing.com/parts/hok-2451hkr/overview/year/1967/make/chevrolet/model/camaro