Performance Design Carbon Fiber LS7 Intake

[John McIntire]

SOLD



I have a carbon fiber intake from Performance Design. http://www.performancedesign.com

It's used, and it came out of a car called a Falcon F7. http://www.falconf7.com

I purchased a complete LS7 from this car and it came with everything. I do not want to use this intake in my car, so I'm offering it up for sale.

It really is a piece of artwork. I'd keep it and build a coffee table and keep it under glass its so nice and exotic looking, but figured it would be better to sell and use the money for the rest of my project.

Im selling it just as you see it, both throttle bodies, fuel rails and stock LS7 injectors. I'll even include the carbon fiber coil covers that came with it too.

Please see the attached pics, and I also took some measurements because I'm sure some of you would like to know.

This is the car it's out of....

https://static1.pt-content.com/images/pt/2018/04/qD0nAzc-1.jpg

https://static1.pt-content.com/images/pt/2018/04/WummZeE-1.jpg

Here it is out of the car....

https://static1.pt-content.com/images/pt/2018/04/sjqtDfC-1.jpg

https://static1.pt-content.com/images/pt/2018/04/RR459Vp-1.jpg

And here it is in my driveway!

https://static1.pt-content.com/images/pt/2018/04/aEdit04-1.jpg

https://static1.pt-content.com/images/pt/2018/04/7R6v69l-1.jpg

https://static1.pt-content.com/images/pt/2018/04/NZC6rIU-1.jpg

https://static1.pt-content.com/images/pt/2018/04/2KEEgaH-1.jpg

https://static1.pt-content.com/images/pt/2018/04/R3Wa60P-1.jpg

https://static1.pt-content.com/images/pt/2018/04/XEhhvyY-1.jpg

https://static1.pt-content.com/images/pt/2018/04/InBsP7B-1.jpg

https://static1.pt-content.com/images/pt/2018/04/fRVye10-1.jpg

The dimensions are as follows:

Center to Center of the TB opening is 16.5"
Overall width in front at its widest point is 21.25"
Height is 10.75"
Depth from the back to the face of the TB mounting flange is 20.5"

Coil Covers are 20.75" wide
6.5" deep
1.75" tall

Everything is located in Central NJ and I'm asking $4500 for it all, intake, 2 throttle bodies, fuel rails, injectors and coil covers.

Thanks for looking.

[John McIntire]

Still available...

[John McIntire]

Anyone want to treat themselves to an early Christmas gift?

[John McIntire]

Reducing price to $3500.... Bueller, Bueller??

[badazz81z28]

Very cool! Just has to be the worst hp to the dollar purchase out there lol.

[71RS/SS396]

Just has to be the worst hp to the dollar purchase out there lol.

Not necessarily true, it depends on the engine combination, mine choked on a single 102 tb. I picked up 50 hp with my twin tb intake.

[John McIntire]

You'd definitely need the right engine to take full advantage of this intakes potential. But it sure is pretty!

[VTtransam]

That height figure you listed, is that from the lowest part of the base of intake port flange to top to the intake (as it sits on your driveway) or from some other reference point?

[John McIntire]

That is from the bottom of the intake flange, as it sits on the cardboard, to the highest point of the intake. I'll double check for you this evening when I get home.

[John McIntire]

Ok, I remeasured and come up with 10 7/8" from the floor to the highest point of the intake. Let's just say 11 inches to be safe.

[VTtransam]

A bit too tall for my car, but an amazing piece no doubt! Good luck with the sale.

[John McIntire]

Anyone getting a tax return? :yeah:

[NoSleeperII]

Can’t believe you still have this

[John McIntire]

Me either! I've tried here, Lateral G, and Craigslist. Any other suggestions?

[NoSleeperII]

Ls1Tech

[John McIntire]

Thanks for the suggestion. Just joined, will have to make a few posts in order to list something for sale in the classifieds.

[John McIntire]

Sold