84 camaro

[1984 camaro]

I have a 1984 camaro Z28. With a Nelson racing twin turbo 427 small block, 4L80e transmission with tci controls, 1800hp ,laptop tunnable tec 3 engine management system, 72mm turbos, moser 9" 35 spline 3.50 ratio detroit locker, full roll cage, custom frame, Ron Davis radiator and intercooler, Ricks hot rod duel aeromotive pump fuel tank, Baer brakes, Fikse FM-5 wheels 18" x 12", Mini tubbed,Spohn suspention upgrades, Koni shocks, aje k-member, Lemmons duel 3" oval stainless exhaust, Billet fuel injection intake, with 16 injectors, Billet valve covers, All brakes, oil, fuel, water and hydra boost are plumbed in stainless hard line, march front runner, stock countour interior, t-tops, a/c.

[toxicz28]

Sweet Ride!!! Do you have any engine bay pics???

[1984 camaro]

Sweet Ride!!! Do you have any engine bay pics???
engine is out right now but i do have some without engine need to develop i will post them later

[Ralph LoGrasso]

Killer car, welcome to the site. Post some more pics of the engine if you got 'em, particularly the manifolds :).

[TonyL]

Reminds me of a car i saw a LONG time ago in PHR or Hot rod. It was a white car with the same wheels you have, but the underneath had a custom floor pan that acted as venturies that sucked the car down at 200 mph+ speed. I havent seen another car that nice till now. (unless im looking at the same car. lol)

Great car! im glad you're here. Looking forward to more pics.

[BonzoHansen]

Man, the outside is great. Looks kinda updated, but in a sleeper-like way. Sneak up on anyone with that, looks stock! Very cool....

[1984 camaro]

Reminds me of a car i saw a LONG time ago in PHR or Hot rod. It was a white car with the same wheels you have, but the underneath had a custom floor pan that acted as venturies that sucked the car down at 200 mph+ speed. I havent seen another car that nice till now. (unless im looking at the same car. lol)

Great car! im glad you're here. Looking forward to more pics.
No it is not that car i had this car for about 10 years stored away then draged it out in 2004 the car was in car craft aug issue top 25 home built musclecars #5

[Rick@Rick's Hot Rod Shop]

Lookin Good Randy!

[1984 camaro]

engine done, exhaust done doing brake lines power steering lines and wiring. should be complete mid june

[BonzoHansen]

Holy hat, I forgot about this one. 3" duals? I'd like to see pics of that if you have them. Do they go over the axle?

[1984 camaro]

Holy hat, I forgot about this one. 3" duals? I'd like to see pics of that if you have them. Do they go over the axle?
Over axle then bumped to 4" duel tail pipes

[BonzoHansen]

They snake all the way back together, like the pic above?

[1984 camaro]

They snake all the way back together, like the pic above?
Yes and they are oval under floor pans

[1984 camaro]

Stainless brake lines are done

[Mr.VENGEANCE]

VERY nice.. i usually dont feel that year Camaro but you got that dead ringer..

[torval]

Yes, very nice!

[1984 camaro]

Look for the 1984 camaro it will be at sema in nov. Should be fun

[bigkaboose]

88 camaro was my first car and I have wanted another one ever since. That is one of the cleanest nicest camaros I have seen in a while. Go team 80s!

[1984 camaro]

Thanks. It has been lots of work but it is worth it. Close to two years now. I uploaded pics of fuel lines, the large fuel line is 3/4 inch stainless

[ixfn]

:worship: Daaaaaang! Makes me want to drop everything and get back on my 85 (http://web.pdx.edu/~btc/85/images/ss)! That's beautiful, dude. :worship:

[formula]

man, what a great car. Can't wait to show this to my 3rd gen buddy. It might talk him into keeping his car.

[1984 camaro]

There will be many things to update over the next few weeks so I will post pics as they come

[79cutlass]

cool dude........keep us informed!

[USAZR1]

There will be many things to update over the next few weeks so I will post pics as they come

Looks like an awesome car you have there. One needed update might be to a 4L80E. Can't imagine a 4L60E handling that kind of power w/o serious problems.
Welcome aboard and keep us posted on your progress.

[1984 camaro]

Looks like an awesome car you have there. One needed update might be to a 4L80E. Can't imagine a 4L60E handling that kind of power w/o serious problems.
Welcome aboard and keep us posted on your progress. Yes Iam very aware of the 4L60E. The transmission shop done many home built billet parts and only builds race transmissions, and felt that it will hold up. Time will tell. I did not want to cut up tunnel because the 80E is so much larger. But that can always be added.

[1984 camaro]

Added pics of floor pan and frame mods also the roll bar

[1984 camaro]

Go to nelsonracingengines.com the camaro is on his site and also will be adding a 80E transmission

[1984 camaro]

Pic of 80e installed

[1984 camaro]

Just added pic of tubs

[1984 camaro]

This is a picture of the billet intake by nelson racing. The camaro has been a long project but it has been worth it. Nelson took my wife and I to sema last year we had a blast. Tom was a super cool dude. We stayed at his shop until 2 am just so see a twin turbo run on the dyno Wow that was way cool.
The camaro has been moving along again the tubs are complete done by www.bentcustomandperformance.com (http://www.bentcustomandperformance.com). The underside is getting paint monday Many hours were spent on blending and forming the floor pans they will be base clear done by scotts customs.
The cars upholstry is next witch will about 4-6 weeks. The rear panels were a very close fit but not quite. All seats are in the car. The rear panels will be reformed and sent out to be injectioned molded to look stock

[1984 camaro]

The camaro will be at sema this year booth number 20615.

[69CamaroRacer]

That thing is freakin sweet... I miss my 84 Z-28 that I had in High School

[1984 camaro]

Pcis of engine bay

[grumpy44]

I have a little tear forming, thats so nice dude.

[1984 camaro]

I have a little tear forming, thats so nice dude.

Thanks

[cpd004]

WOW! Great so far!

[1984 camaro]

Picture of radiator cover

[1984 camaro]

Picture of engine at nelsons both at sema

[WMCC Doug]

That's a great looking 3rd Gen. I love white Camaros. :twothumbs

[1984 camaro]

Take a good look at the june issue of hot rod.
Randy

[ed1le]

Got it yesterday in the mail, your car is beautiful!

[1971CHEVELLE]

great car :1st: keep us posted

[icebird84]

Excellent 3gen you have there nice and clean , Excellent work

[1984 camaro]

Thanks for the great response I just got mine today hope you all enjoyed as I did. The cover of hot rod. I figured that I might get a couple of pages never thought the cover.
Randy

[mc84_zz4]

Wow, one helluva build! It can give me some serious inspiration.
I had not seen this post before, and I just got the Hot Rod mag yesterday....hmmm coincidence?

[1984 camaro]

No the first post was about three years ago it just got fired up again

[david068513]

Nice car!!!! I saw it in hot rod and just found this. beautiful car! I love it. I own a 1992 Z28(I like your hood and spoiler :headbang:)

[68Formula]

I was bummed there were no finished interior shots.

[cpd004]

Congrats on the article! please post some more pics when you get a chance....the magazine didn't show enough.