PDA

View Full Version : LS3 swap connection question



Kmart78
02-27-2018, 08:14 PM
I'm installing a GM Connect and Cruise in my 71 Camaro and can't figure out what gets plugged in this connector. Can someone tell me what goes here??
149807

Timmah
02-28-2018, 08:46 AM
This connection is the purge solenoid for the evaporative system. The solenoid runs to the canister that vents the fuel tank.

dhutton
02-28-2018, 09:51 AM
This connection is the purge solenoid for the evaporative system. The solenoid runs to the canister that vents the fuel tank.

Not normally used on a swap. You can remove the solenoid and install a plug.

Don

Kmart78
02-28-2018, 01:03 PM
Great, thanks guys!