Ls7

[REVIN KEVIN]

Hey. I had to put my Camaro project on hold for a few years and now I want to finish my Laguna S3 project. I don't want to just let some of the things I purchased go to waste so I am looking at selling the engine for the project. A couple of years back I purchased an LS7 from a side swiped Z06 that had around 30,000 miles on it. Below is a list of the items I have for it. The heads are off the block and they are still in the boxes from Texas Speed when they did a finer CNC cut on them. Everything listed was for my 1970 Camaro project. I have around $14,000 in all of this stuff. Except for the short block, everything else is new. $14,000 or PM me with a serious cash offer. I can post some pictures tomorrow or email them to you.

LS7 from 2007 Corvette Z06 around 30,000 miles

CNC ported heads by Texas Speed with Cometic head gaskets

Trunion upgrade

Mast Motorsports cam and spring kit

Holley EFI tunnel ram intake 90mm throttle body black crinkle finish

Holley fuel injectors

Chevrolet black crinkle valve covers

McLeod flywheel

Engine comes with complete front dress. AC, alternator, power steering pump, water pump. Dry sump oil tank and lines.

Complete wiring harness. Every wire from the donor Corvette.

Corvette Z06 gauges, ac controls, ac/heater system, Corvette black dash

Hooker LS swap headers

Hooker LS swap motor mounts

Hooker 3” SS X-Pipe exhaust system

New gas tank with built in EFI fuel pump

Maybe a few more pieces

[badazz81z28]

What’s the part number on the exhaust system?

[REVIN KEVIN]

Hey. I just got back from my new storage. 2 storage buildings and my friend lost his shop has my receipt MIA. This is what they are. I just looked at them and they are still awesome.

https://www.holley.com/products/ls_power/ls_swap_systems/1970-81_gm_f-body_ls_swap_components/exhaust_systems/parts/2297-3HKR

The engine mounts
https://www.holley.com/products/ls_power/ls_swap_systems/1970-81_gm_f-body_ls_swap_components/engine_and_transmission_mounts/parts/12512HKR

I can't find the listing for the 3" X-Pipe exhaust. It is all Hooker from headers to tail pipes with mufflers.

[REVIN KEVIN]

Or just the engine...
149722

[REVIN KEVIN]

150348150349

[badazz81z28]

FWIW my LS7 made 550hp to the tires with those heads and their stage 2 cam.