Unfiniished Track-Warrior 57 Chevy Project Car

[Ron Sutton]

Ron Sutton Project Car - For Sale


57 Chevy 9/10 Scale TA Track Warrior


147593

This was my project car I was building for myself in early 2013, right after I closed my 9 race teams. I built the chassis for myself for street, autocross, track days & 200 mph Silver State runs.

It is a chromoly & DOM tube chassis I designed, that later became the design for my TA Track-Warrior chassis. The body is fiberglass, originally made for drag racing & requires work to make it correct for this purpose. The body is basically the size of a 1st Gen Camaro, except a little narrower. 67" front fender width, 108" Wheelbase & 48" height.

You can see all the details, list of parts included, price & photos in the attached PDF.
147594

No, Miss February 2007 Heather Rene Smith does NOT come with the car. :lol:


For more information – Contact Ron Sutton Race Technology:
Phone: (844) 722-3832 Ext 3
Address: 11374 Amalgam Way, Suite K, Gold River, CA 95670
Website: www.RonSuttonRaceTechnology.com (http://www.RonSuttonRaceTechnology.com)
Catalog: www.RonSuttonRaceTechnology.com (http://www.RonSuttonRaceTechnology.com/catalog)

[Rod]

No, Miss February 2007 Heather Rene Smith does NOT come with the car.


dang it

[southernfriedcj]

dang it

That was a deal breaker for me too. I was getting ready to ask for wiring instructions...

[Ron Sutton]

:lol::lol:

[ryeguy2006a]

That's a really cool project. Very unique for sure. Just curious, how would you go about registering this?

[Ron Sutton]

That's a really cool project. Very unique for sure. Just curious, how would you go about registering this?

Oh wow! I forgot to mention I bought a Clear Title for a 57 Chevy V8 Bel Air.

[Ron Sutton]

OK ... I got busy & forgot about this project car I want to sell ... except I'm reminded when I walk out into my R&D shop here at Ron Sutton Race Technology ... and there it is taking up room.

When we moved it, I found a ton more parts that go with it:
Wilwood dual Brake Pedal setup
Joe's Racing throttle pedal setup
Sliding seat mounts
RSRT Track-Star Spindles
Full set of Howe Ball Joints
Speedway Engineering Floater Hubs, bearings & seals
Collapsable Safety Steering Column
Quick Release for steering wheel
Slotted billet steering center link
5" RHE Racing steering arm
5" Bearing supported Idler Arm
Tie rod tubes & rod ends
Bump Steer Kit
All brackets for 3-link and/or 4-link
All tubes & rod ends for 3-link and/or 4-link
All hardware for 3-link and/or 4-link
Double adjustable (both sides) panhard bar mounts
Tube & rod ends for panhard bar
All hardware for panhard bar
Fiberglass Dash with space for gauges or digital dash
Dyna Mat Sound deadening insulation
American Autowire Highway 22 Full System
* Probably more that I'm forgetting.

PLUS: An Actual 57 Chevy Bel Air V8 Title

Grand Total NOW .................................................. ... $32,805


Sold As-Is, Where-Is with no deletions ................... $8500 or Best Offer

It's gotta go! Make me an Offer!

Options:
Skid Crating to ship $300


Important Notes:
A. One of our shops can modify it & finish it for you to whatever degree you want.
B. All of the parts needed to finish the car are available in our catalog HERE (http://www.ronsuttonracetechnology.com/catalog/?page=166)

For more information – Contact Ron Sutton Race Technology:
Phone: (844) 722-3832 Ext 3
Address: 11345 Trade Center Drive, Suite 450, Rancho Cordova, CA 95742
Website: www.RonSuttonRaceTechnology.com (http://www.RonSuttonRaceTechnology.com)
Catalog: www.RonSuttonRaceTechnology.com (http://www.RonSuttonRaceTechnology.com/catalog)

[Ron Sutton]

Oops! I forgot some stuff ...

4 Camera brain to add cameras to Race Technology Data logger $1200
Quicktime Bellhousing for GM Small Block/Big Block & T56 Trans = $660

Included ... no extra charge.

Ron Sutton