chpr1972
12-24-2017, 07:49 PM
What is an inexpensive metal disc/disc master cylinder that fits a 66 Lemans the easiest. I read a bunch of posts and most were plastic reservoirs. I think the 66 Corvette was the one to use , but they are expensive now.
Look into these:
'80 Malibu 229 v6 manual: DORMAN Part # MC39166 7/8" bore
Primary Outlet: 9/16 x 18
Secondary Outlet: 1/2 x 20
1978-1980ish Malibu, El Camino, Cutlass, Grand Prix, Regal, etc came
with manual brakes from the factory. They come with a 7/8 inch bore.
7/8" bore manual brake master cylinder for a 1978 malibu, Wagner part number MC101252
Another 7/8" bore option is from a 1978 Chevrolet Monza. This master is designed to sit level with the ground.
CENTRIC 13062005 Master Cylinder
7/8", GM with 9/16 - 18 & 1/2 - 20 ports, dimple
BUICK CENTURY (1978 - 1979)
BUICK REGAL (1978 - 1979)
CHEVROLET EL CAMINO (1978 - 1979)
CHEVROLET MALIBU (1978 - 1979)
CHEVROLET MONTE CARLO 1979
PONTIAC LEMANS (1978 - 1980)
PONTIAC SUNBIRD (1976 - 1980)
Bob.
F-Body International
01-02-2018, 09:32 PM
Thanks for sharing the knowledge Bob!
That '78 Monza piece looks cool!