View Full Version : 80 camaro subframe connectors and stock seat location
Starfire2890
07-20-2017, 11:49 AM
Hello all. I'm building a 80 Z28 and looking to put in subframe connectors. My question is if I cut the floorboards to run them thru would the seats have to sit a little higher to clear them or do the connectors not proturd that far up? Thanks in advance
Zspoiler
07-20-2017, 07:48 PM
If they are weld in maybe.But a bolt in frame connectors shouldn`t be an issue. I have a 1979 Z-28 RS with Competition Engineering frame connectors with no issues.
BonzoHansen
07-20-2017, 09:21 PM
Hello all. I'm building a 80 Z28 and looking to put in subframe connectors. My question is if I cut the floorboards to run them thru would the seats have to sit a little higher to clear them or do the connectors not proturd that far up? Thanks in advance
Thats how detroit speeds work, chck their site for pics. Seats should be fine
Randy67
07-21-2017, 05:59 AM
I made up straight weld-in subframe connectors for the 81 Camaro I had. They didn't interfere with the seat, although I didn't have the stock seats to try it out. You can see one here: http://s967.photobucket.com/user/rjpajer/media/81%20Camaro%20CP%20car/IMGA0962.jpg.html
BMR Sales
07-21-2017, 08:35 AM
These are DSE's Weld-in in a '73
https://static1.pt-content.com/images/noimg.gif (https://postimg.org/image/jvu7giiv1/)
https://static1.pt-content.com/images/noimg.gif (https://postimg.org/image/76zwwucql/)
Starfire2890
07-21-2017, 07:49 PM
thanks everyone
Powered by vBulletin®