art morrison camaro subframe

[marty69212]

Anybody know the length of the shocks on an art morrison camaro subframe? I bought a scott mock frame and trying to make it road worthy!

[another69]

You mean extended vs collapsed?

[David Pozzi]

Art Morrison made a change in upper shock mount height and width around 3 years ago. My 67 Camaro has the low, Mary's came with the higher mounts. I think it was due to them switching to the Strange shocks.

[marty69212]

I need the extended length.mine are way too long , have to much travel and are the mounts are dangerous

[David Pozzi]

Most shocks for the front will have 4" travel. Ride Tech makes a 4.1 that's we used.
Installed height for that shock is 12.5"
Extended Length: 14.23"
Compressed Length: 10.3"
Ideally, you should have a little more compression travel than rebound, the bump stop takes up some of the compression travel.

If you use a longer shock on a Art Morrison sub, the coil starts getting too close to the upper A arm & in droop, the upper ball joint will probably start binding.