All things being equal 1 piston vs 4 piston

[alky]

Hello,
As asked above, All things being equal 1 piston vs 4 piston, Rear, Manual Brakes

I have a 1969 Camaro with manual disc brakes, Wilwood 15/16 master with older Baer Track4 and Touring rears. These are the Corvette C4 PBR's.

Trying to get more braking force. Would going to a 4 piston caliper have more holding power than a single piston caliper?

Comparing the C4 PBR to a Wilwood Dynalite.

Thanks
Denny

[Tincup]

I doubt it would make much difference on the rear, You could go to a 7/8" bore master, that would give you about 13% more force.

[alky]

Thanks for your input. I had a 68 Camaro with manual brakes and Wilwood dynalites all around, it seemed to better than this car. Maybe it was in my mind haha. Still trying to figure this out

Thanks

[Rick Dorion]

When I ran C4 brakes I used 7/8" MC and EBC yellows. Had good braking then.

[alky]

Thanks, Ill try the higher friction pads first. I just didn't want pads that would create a lot of brake dust.
I know its a trade off