C6 UCA mounting angle

[F100 AMG]

On the Corvette C6 the UCA are not parallell to the ground. Anybody knows the angle between the two red lines as shown in the picture?
135213

[another69]

Would you want to reference the chassis or ground? What are you trying to do?

[F100 AMG]

Would you want to reference the chassis or ground?To the chassis please.



What are you trying to do?
This winter I'll install a C6 front suspension on a Ford F100 frame. I'm trying to do it without buying a front clip from the US (which would be the easy way). The freight to Norway is almost just as much as the clip it self... I already have the knuckle arms, hubs, control arms etc.

[another69]

I think there may be many other angles to consider then just the "side view". If you can get dimensions from a Corvette, that may be your best bet. Anything can be done with enough time & patience, just make sure you have all points considered before making any welds. That being said I'd love to see you pull it off

[ace_xp2]

If I recall right, they are parallel in plan view, same with the lowers. Can't remember how much anti-dive angle they've got on them though, sorry.