PDA

View Full Version : My Chevy centerbolt LT1 wire looms.



Samckitt
11-15-2005, 08:51 AM
I got this idea from Russell, but refused to spend $70 for them. So I made my own. I already had a set of Made-for-you perimeter style wire loom brackets. So I made the aluminum bracket to hole them & use the 2 center holes of the valve covers.
Scot

Derek69SS
11-15-2005, 10:26 AM
Lets see more pictures of that engine :) ...both sides, good pics of the headers, pulleys/brackets, etc. I'm looking for ideas :cool:

ertoys
02-23-2006, 06:39 AM
Looms look good, care to share the specs for them?

Samckitt
02-23-2006, 07:02 AM
I have switched to the LT1/LT4 composite valve covers, so these are open for offers if interested. You would get the aluminum bracket & the pressed in pim nuts. You would need to purchase the "Made For You" perimeter style Chevy looms.
Scot

CAMAROBOY69
02-23-2006, 08:13 AM
That turned out nice. Did you have the pices laser cut then you bent them yourself?

gen3bu
02-23-2006, 06:39 PM
looks better than the russells piece

Samckitt
02-23-2006, 10:22 PM
That is where I got the idea from. But improved them a little.

CAMAROBOY69
02-24-2006, 04:35 AM
Did you have the pieces laser cut? Then you bent them yourself?

Samckitt
02-24-2006, 08:24 AM
Yep I had them cut here at work. I was only making 2 of them so they said they would do it. But for larger quantities they frown on it.

CAMAROBOY69
02-24-2006, 08:33 AM
Yep I had them cut here at work. I was only making 2 of them so they said they would do it. But for larger quantities they frown on it.
If you decide you want quite a few of them to sell, let me know. :)

Samckitt
02-24-2006, 03:42 PM
You know I will. you may become my new best friend. LOL

CAMAROBOY69
02-27-2006, 10:42 AM
Oh yeah I forgot to mention that my laser guy can also do the bends for you too for only a couple more bucks. You wouldnt have to do anything besides sell them. :)
If you already had the program then I could just send it to him for a quote. After that I would even let you advertise them on my site. I would just make a link in the projects page with your Chevy centerbolt LT1 wire looms.

Samckitt
02-27-2006, 02:26 PM
Hey Adam,
Just in case you didn't put 2 & 2 together yet, your laser guy is cutting some brackets for me now/soon.
Scot