PDA

View Full Version : 2nd Gen Pontiac firebird with AME front and rear clip 3 link and 4 link!



Doug1
11-21-2016, 05:54 PM
Here a project car I have been sitting on for several years after the builders went out of business. It's a 1976 Firebird with an AME front and rear clip and a fuel cell in it. After the builder went under I stored it since I was already building my own project.
This is one of a kind as far as I know since AME engineered it with a 3 link and a 4 link so it could be swapped easily from a road car to a drag car.
https://static1.pt-content.com/images/pt/2016/11/729_zps5567a118-1.jpg
https://static1.pt-content.com/images/pt/2016/11/725_zps73c4caef-1.jpg
https://static1.pt-content.com/images/pt/2013/10/IMG_0861-1.jpg
The drive train was used in another project but the frame and Ford 9" housing, axels, etc are still in the car. I have a set of fenders but have used the hood and nose on my latest build.
Car with title, frame, fuel cell, fenders, etc. $10,000 firm. That's less than half of what I put into it. I don't need to sell it so I'll keep it unless someone wants a ready to start project. You can look up "Triple Threat Trans Am" here and on Pro-Touring.com to see the old build threads
Serious inquires send me a PM. Car is located in Charleston, SC
$10,000