FS: Pair of Boze Pro touring wheels 18x8 brushed satin

[slimjim]

For Sale!
DESCRIPTION:

brand new PAIR of Boze Pro touring wheels. (Technically I've had them a year and put tires on them but they have never even been rolled on.)
They're also Brushed satin in finish so you will have to have rear wheels made to match them, OR have them painted as you desire.

SIZE- 18"x8"
BACK SPACE- 4.875"
STUD PATTERN- 5x4.75"
FINISH- Brushed satin
TIRES- Yokohama yk580 235/45/r18 brand new


SO I SCREWED UP!
I Put this off for a while but it's time to test the waters on my front wheels. Selling because I bought them when I was initially planning on running a stock subframe, since then I have upgraded to a speedtech subframe and I chose to run different spindles and hubs to allow for Brembo brakes, in doing so my track was widened and now these wheels cause too much problem with the front fenders. This will not be a problem for anyone running a stock subframe or a speed tech subframe with their ATS spindles. I'm upgrading to 18"x10's with less Backspace.
Tires Included, they were approx $140 each, I'll leave them on, free of charge.

PICTURES-
https://static1.pt-content.com/images/pt/2016/05/IMG_6568-1.jpg (http://s198.photobucket.com/user/weeaazz/media/IMG_6568.jpg.html)
https://static1.pt-content.com/images/pt/2016/11/IMG_6517-1.jpg (http://s198.photobucket.com/user/weeaazz/media/IMG_6517.jpg.html)
https://static1.pt-content.com/images/pt/2016/11/IMG_5676-1.jpg (http://s198.photobucket.com/user/weeaazz/media/IMG_5676.jpg.html)
https://static1.pt-content.com/images/pt/2016/11/IMG_6672-1.jpg (http://s198.photobucket.com/user/weeaazz/media/IMG_6672.jpg.html)
https://static1.pt-content.com/images/pt/2016/11/IMG_7363-1.jpg (http://s198.photobucket.com/user/weeaazz/media/IMG_7363.jpg.html)

LOCATION-
I'm currently out of the country, so these will have to be pick-up only from Mooresville NC at Ambition Road.

PRICE-
$1500 non negotiable
These cost me $1770 before the BOZE price increase including the shipping and brushed satin finish and another $280 with tires, you're saving over $500 and no 6-8 week wait. Under the 2016 pay structure these would cost $2040 without tires.

CONTACT DETAILS-
Best way is to message me on here or email jamesbstevens at hotmail.com

[slimjim]

As I kind of expected, I may have some expensive door stops in my garage

[firecatwilson]

Might just be cause it's not a whole set. Do you have the rear's, but using them? Or are they available?

Edit** Never mind, I see you went to a different size front setup. I like them, but I'd be waiting for awhile to get a rear set.

[slimjim]

I don't need them right now so could be persuaded to sell as a set and reorder some more. It just isn't necessary for me as I'd be reordering the exact same rears.
I figured this would be my problem.


Might just be cause it's not a whole set. Do you have the rear's, but using them? Or are they available?

Edit** Never mind, I see you went to a different size front setup. I like them, but I'd be waiting for awhile to get a rear set.

[Gmc427]

hi, what size are rears?regards

[slimjim]

the rears are 19x12 with a backspace of 5.25"

I'll be in NZ txt month...but these won't fit in my luggage



hi, what size are rears?regards

[Gmc427]

you sure?

[Gmc427]

do you think the fronts would be ok with willwood brake kit which widens track by .3"?what tire do you have on rear?regards george

[slimjim]

My problem is that the speedtech subframe widens the track and is suited for ATS spindles, but I used ridetech spindles with a wildwood hub, offsetting the track quite a bit.
.3" shouldn't create any drama. The rear tires are a 325/35/19, I can't remember what brand they are, they're nothing special.


do you think the fronts would be ok with willwood brake kit which widens track by .3"?what tire do you have on rear?regards george

[slimjim]

I'd be after $4500 for fronts and rears considering thats over $500 less than they cost from boze and without the 6-8 week wait. plus they come with tires