LS Swap Parts and more ** KORE3 Hubs, ZR1 Wheels, Carbon Fiber Hood **

[plick1221]

Selling off some parts that we are not using on our 1969 Camaro build. These parts are all new. They were only mocked up on car since it is still in build phase.

Located in Charlotte,NC


SOLD - BRP Musclerods 67-69 F Body LS Swap Motor Mounts & Crossmeber w/tranny mount

$500 (pickup only) - 1st Gen Camaro Body Armour Carbon Fiber Hood L88 Corvette Style

$750 + shipping - High Rise Aluminum Sheetmetal Intake with Billet Fuel Rail and LS3/LS7 injectors fits LS3 Rectangular port with 90mm TB

$700 + shipping - New In Box CTS-V Front drive with Fixed Displacement AC compressor GM Kit Part # 19155066

$1000 (pickup only) Waterman Racing 18 Gal Fuel Cell w/ foam, bladder & plate

$2,000 (pickup only) OEM Speedline C6 ZR1 Corvette Chrome Wheels 19's & 20's w/ OEM Michelin Pilot tires 285/30/19 & 335/30/20 with 70% tread left


133655
133660
133668133669133670133671133672

[simon455]

Pm sent

[AU Doc]

I wish you were closer. I love that hood!

[Turbokid]

What's the brand name and part number on the intake

[plick1221]

What's the brand name and part number on the intake

It is a custom fabbed intake. Made here by some NASCAR fabricators in Charlotte. We have used these before with twin turbo builds. This was the route we were going with twin 74mm Turbonetics and then decided this car would be N/A instead. G

[SD67]

Is the intake for an LS3 or LS7? What is the opening size, 102mm? thanks.

[plick1221]

Is the intake for an LS3 or LS7? What is the opening size, 102mm? thanks.

LS3 Intake setup with 90mm for stock LS3 throttle body.

[plick1221]

KORE3 Hubs are sold

[Island Grown]

Free bump. He was able to send me more info on the intake manifold setup with the TT setup. But my builders have other plans for my car this time around.

Good luck with the sale.

[hp jnkey]

How do the ZR1/Z06 wheels fit a mini tubbed car?

Thought they were wrong back spacing, at least that what I was told.

[plick1221]

How do the ZR1/Z06 wheels fit a mini tubbed car?

Thought they were wrong back spacing, at least that what I was told.

They do require spacers in the front to work. The rear will work with or without spacers depending on the rear end width.

These wheels are pretty much just on the car for mockup. They actually look pretty good, but just not the look we are going for. We have Forgeline wheels on order.

[plick1221]

Crossmember & Motor Mounts SOLD

[simon455]

Bump for a good seller!
Hubs arrived mint...thanks

[dmzmoto]

Who makes that hood? How is the fit on the car? Stock hinges or were you using the billet ones for fiberglass hoods?

[dmzmoto]

Do you have a Pic of the bottom side?