LED Momentary Switch

[aps63]

I want to use these LED momentary switchs to operate a few things.
Starting with some exhaust cutouts & license plate covers.
I've seen them used for exhaust cutouts but can't figure out how to wire it.
I'm assuming I have to add something besides the momentary switch.
Any help would be appreciated.


https://static1.pt-content.com/images/pt/2016/10/0b49b870c56741d5b591fdac613da860_zpsb0u0-1.jpg

https://static1.pt-content.com/images/pt/2016/10/24b3b203f3dc40fdb874e9ae1b5c638e_zps7e1p-1.jpg

[Schwartz Performance]

Just run them through their own relays. Exhaust cutouts use a momentary switch anyway.. If you bought new cutouts there will be a wiring diagram in the instructions.

[chuckd71]

I'm doing something similar, using these though because they come with the harness. If you read the top reviews people explain how to wire them different ways depending on when you want the led to come on. https://www.amazon.com/gp/product/B00ZR7MOU0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Here is a wiring diagram of sorts
http://g02.a.alicdn.com/kf/HTB13sc3HVXXXXXfXFXXq6xXFXXXw/16mm-12V-Car-Auto-Green-LED-Metal-Switch-Latching-Push-Button-ON-OFF.jpg