Header Options First Gen Camaro - DSE Subrame

[AB69Z]

Looking for some first hand feedback on different options that have been used besides the DSE headers. I've been looking at Ultimate, anyone have experience with them on a car?

[icemanrd19]

Stainless works fit great. 3 different cars with 3 dse subframes

[sheck44]

Have my second set of American Racing Headers on the way ... specifically designed for DSE subframe (read Note)
These headers are top notch, with great ground clearance

http://www.americanracingheaders.com/Products/Engine-Swaps/ProductID/15

Cheers
Steve

[Toddoky]

There's also a new long-tube header option for you from the Hooker Blackheart line for the 1st-gen F-body/DSE application; they are available with 1-7/8" or 2" primaries. You can find them on the Holley website...the part number for one of them is 70101329-RHKR.

[blown32]

Good one AB69Z! I am also looking LS header options with the DSE front end.... I'll be watching your thread!

[TheJDMan]

Is everyone just assuming an LS engine?

[icemanrd19]

Is everyone just assuming an LS engine?

We have another car at the shop with a 383/tko and dse subframe with stainless works headers and they also fit great.

[AB69Z]

Is everyone just assuming an LS engine?

Yes sorry. It has an LS engine

[Dave95Z28]

There's also a new long-tube header option for you from the Hooker Blackheart line for the 1st-gen F-body/DSE application; they are available with 1-7/8" or 2" primaries. You can find them on the Holley website...the part number for one of them is 70101329-RHKR.

Any idea if they will work with Speedtech's Pro-Touring Subframe (not the new Extreme Subframe) for first gens. Looking for a 1 7/8" or preferably 2" header for my cammed and pullied LSA.

Thanks,

David

[Steve68]

I know this is a old thread, but Hooker makes a header for the DSE sub now,