Frustrated with steering rack

[XLexusTech]

Anyone know the thread pitch for a c4 c5 corvette steering rack? Pressure and return?
i can tell you M16 1.5 and m 16 1.5 is not the right thread ...

[dhutton]

Should be M16 and M18 o-ring. Are you sure it is a corvette rack? Most aftermarket subs use a mustang rack. Art Morrison sells the fittings for the mustang rack.

Don

[XLexusTech]

Good idea looking at AME now

[XLexusTech]

Should be M16 and M18 o-ring. Are you sure it is a corvette rack? Most aftermarket subs use a mustang rack. Art Morrison sells the fittings for the mustang rack.

Don. Winner winner it's a mustang Rack

[XLexusTech]

Yeah I can't find thread gauge kit but I am looking turns out I have a Ford rack... now I have to figure out if it's mustang 2 SAE threads or 84 to 97 which is metric... then figure out the fight Oring .... if anyone here has a JRS setup and has been down this road please post

[XLexusTech]

Pep boys had a good selection of fittings for me ... M14 M16 worked .. also found the 16 side threaded were munged on the rack. Grrr...