Ricks Stainless EFI Tank for A-Body

[chevy111]

SOLD DELETE

[COLOR=#000000][FONT=verdana]For sale is an almost new Ricks Stainless EFI Tank for a 68-72 Chevelle or A body cars. This tank has about 2k miles on it and was pulled after the car was wrecked. It has an OEM pickup and pump. This is a nice tank and worked great for an LS2 swap. Asking $850 Lowered Price shipped to lower 48. Need this gone.

It's close to $1400 for this tank at jegs with the sender.
Please no lowball offers. It's just a part I don't need.
Below is a link to the tank.
http://www.jegs.com/i/Ricks-Hot-Rod-Shop/781/3061/10002/-1

[andrewb70]

Post a location please.

Andrew

[raustinss]

Oem pump as in ctsv ?

[chevy111]

Located near Sacramento Ca. I'm not sure what the pump is exactly. It's been a few years but I was told it was rated for around 600hp and was an OEM type pump and could be bought at a local parts store if it goes out. I do know it worked good when it was in the car and the ls2 never starved for fuel.

[chevy111]

Bump

[Bill Howell]

Does this have a vent? I am guessing the plugged bung is possible vent? Does this tank have a baffle or no? Depends on build date. Are you open to offers?

[chevy111]

Ill get back to you on those questions.

[chevy111]

I pulled the sender and the tank has baffles. See picture. The tank has a Walbro Pump in it. Its rated to support up to 600hp from what I have seen online. As far as the bung it is the vent you just have to unplug it and run a line.

[chevy111]

Bump

[chevy111]

Bump

[chevy111]

Bump

[chevy111]

Bump

[IMPALAMAN1]

Bump

what are the dimensions of the tank?
may work for my project.

width, length and depth

[chevy111]

I may have to update the ad as I think this is a 68-69 tank. It was in a 70 but apparently they are different. I'll find out for sure.

[raustinss]

Part number might help if you know it

[chevy111]

That's what I'm going to get. I just need to dig it back out and look at it to see if it has it. I'm about 90% sure it's 68-69 though. This is what I come up with.
http://www.jegs.com/i/Ricks-Hot-Rod-Shop/781/3061/10002/-1

[chevy111]

I confirmed this is a 68-69 tank and updated the post. Sorry for the confusion.

[chevy111]

I just had another member tell me that this will fit a 68-72 which it was in a 70 before the wreck. The filler tube is removable for certain cars but they are dimensionally the same 68-72. Please don not take my word for it feel free to call ricks and confirm.

[chevy111]

Bump price change above.

[Kevin4578]

Too bad our canadian dollar is so crappy otherwise I'd be interested, glws!

[chevy111]

Yea the Canadian dollar has been in the basement lately. I feel for you guys up there.

[ddavis15]

Hey Chevy, you still got this thing? I'm willing to make you a deal if you let me.

[chevy111]

Still have it.

[chevy111]

I Responded to your message but I don't see anything in my outbox. Not sure if it went through.


Hey Chevy, you still got this thing? I'm willing to make you a deal if you let me.

[chevy111]

Bump

[chevy111]

Bump.

[chevy111]

Bump

[IMPALAMAN1]

what are the dimensions of the tank?
may work for my project.

width, length and depth

??? Never got an answer to this

[chevy111]

I had a guy saying he wanted it and was supposed to put a deposit but you know how that goes. I'll get you measurements when I get a chance.

[chevy111]

8" Tall
36" Width
24" depth

[IMPALAMAN1]

Thanks for the numbers. i am going to double check the body mounts this weekend but it is looking to be about 10" too short. My factory tank is 36x34x6. Thought it would be closer.

[chevy111]

It would probably work if it's just straps. It just hugs the floor board.

[chevy111]

Bump

[chevy111]

Bump